Gravel in Aldie, VA

Hello Gravel connects you with local quarries and aggregate suppliers that serve Loudoun County and Aldie specifically, so you will be matched with vendors that can deliver to your zip code. Sources often include nearby Virginia quarries and regional suppliers in neighboring counties; availability depends on the material you choose and current inventory. Enter your zip code on our site or contact our team to see which exact suppliers are available for your address.

Minimum orders on Hello Gravel start at 3 tons, which is our nationwide minimum for most areas. Delivery fees in the Aldie area commonly range from free up to about $0-$150 depending on distance from the quarry, driveway access, and whether special placement is required; tight access or short-load fees can increase cost. Standard delivery is 2+ business days and next-day delivery may be available for an additional fee if ordered before the cutoff.

For Aldie’s clay soils and the local freeze-thaw cycles, a layered approach performs best: start with a compacted base of crush-and-run or 3/4u0022 crushed stone, then finish with a washed 3/8u0022 or 1/2u0022 crushed stone for interlock, or pea gravel for a softer appearance. Avoid relying on stone dust alone for driving surfaces because it compacts hard but can rut and become muddy during heavy rains and freeze-thaw. Add good subgrade drainage and a geotextile fabric to separate gravel from clay soils and reduce washout.

Many Loudoun County zoning rules focus on impervious surface limits and driveway permits rather than banning gravel outright, but individual HOA covenants in Aldie often include restrictions on driveway materials, color, or finish. Before installing gravel, check your HOA covenants and contact Loudoun County zoning or building department for permit requirements and setback rules. If in doubt, request a variance or written approval from your HOA to avoid fines or required replacements.

Material-only prices for common gravel types in the Aldie area typically range from about $25 to $60 per ton depending on type and source. Installed costs including grading, base preparation, drainage, hauling, and compaction usually run about $2 to $6 per square foot for a properly prepared driveway, with price varying by access, depth, and site prep needs. For small or straightforward patio installs, expect lower labor costs; for driveways that require excavation, geotextile, or retaining work, costs rise toward the higher end of the range.

As a practical rule for most crushed stone: one ton covers about 120 sq ft at 2u0022 depth, 80 sq ft at 3u0022 depth, 60 sq ft at 4u0022 depth, and 40 sq ft at 6u0022 depth. These numbers assume a typical gravel density and moderate compaction; loose or lighter materials and decorative gravels may cover more area per ton. Always round up and add 5-10% extra for waste, compaction, and settling when placing your order.

Use larger angular rock (1u0022 to 6u0022 riprap), drainage rock (1u0022 to 2u0022 clean stone), or gabion baskets in channels and steep slope runouts to resist washout during heavy rains common in the region. Combine rock with geotextile filter fabric and, where appropriate, check dams or terracing to slow flow and trap sediment; for walkable slopes consider gravel stabilization grids or polymer-stabilized mixes to reduce movement. For any high-flow drainage work, consult a civil engineer or local erosion-control professional to size materials and meet Loudoun County stormwater rules.

Place your order on Hello Gravel and enter your Aldie address so we can match you with suppliers and haulers that serve your area; choose a delivery date on the checkout calendar. In Order Notes, describe desired placement, obstacles, and whether you want tailgate spreading requested (drivers may do this at their discretion); note that tri-axle dump trucks are typically used and exact placement depends on site access. Contact our team if you have narrow access, steep driveways, or need special placement so we can advise and coordinate with the driver.