Gravel in White Oak, TX

Local gravel prices in White Oak vary by type and supplier, but typical retail ranges are: crushed limestone $20-$35 per ton (about $15-$25 per cubic yard), pea gravel $30-$50 per ton (about $22-$36 per cubic yard), washed gravel $30-$55 per ton, and crushed granite $30-$60 per ton. Prices reflect local sourcing, seasonal demand, and haul distance, so your exact price may differ. Hello Gravel requires a 3-ton minimum order and will show exact pricing at checkout for your zip code.

Many Hello Gravel orders in the West Texas region qualify for free delivery, but fees depend on supplier distance and truck routing. If charged, short residential deliveries are often $0-$100, while longer hauls can add $2-$6 per loaded mile beyond the supplier's service radius; optional tailgate spreading is requested at checkout and is typically an additional charge or at the driver's discretion. Exact fees are shown at checkout and vary by supplier and truck availability.

For White Oak's clay soils and hot, dry climate, a layered approach works best: a compacted crushed-stone base (3/4u0022 minus or Class 2 limestone) under a surface of 3/4u0022 crushed stone or crushed limestone for driveways, pea gravel or decomposed granite for patios, and 3/4u0022 crushed stone or crusher run for RV pads. Use a stabilized base and consider geotextile fabric to separate the clay subgrade and reduce migration. Local suppliers can recommend blends that match regional geology.

Use this quick method: cubic yards = (area in ft2 * depth in inches) / 324, and then multiply cubic yards by about 1.4 to get tons (regional variations apply). For example, per 1,000 ft2 you need roughly 8.7 tons at 2u0022, 13.0 tons at 3u0022, and 17.3 tons at 4u0022. For smaller areas, scale the numbers by your actual area or use Hello Gravel's material calculator for an exact estimate.

Requirements vary by municipality and HOA. Some HOAs or local roadway authorities may require edging, specific surface materials, or permits for driveway changes or new curb cuts, while others have no restriction on gravel type. Before ordering for a new driveway or major change in White Oak, contact the City of White Oak, Wood County, or your HOA to confirm rules and permit needs.

In West Texas, expect to regrade and top-dress a gravel driveway every 1-3 years, with heavier traffic or poor drainage requiring more frequent attention. Typical maintenance tasks include regrading to fix ruts, adding 1-2 inches of fresh stone, and spot compaction; homeowner costs for a DIY top-up are often under $200 for small drives, while contractor grading and re-spreading can run from a few hundred to over $1,000 depending on size. Good drainage and proper base prep reduce long-term maintenance needs.

For clay subgrades in White Oak, install geotextile fabric to separate the subgrade, put a compacted crushed-stone base of 4-6 inches (Class 2 or 3/4u0022 minus), compact it with a plate compactor or roller, then add 2-3 inches of surface gravel. Proper compaction and a stable edge (timber, stone, or concrete) greatly extend performance and reduce migration into clay. Base materials and compaction equipment typically add to cost, so expect base prep to increase project cost significantly compared with merely placing surface gravel; get local contractor estimates for precise pricing.

Gravel has the lowest upfront cost and is easy to install (commonly $1-$3 per ft2), but it needs regular maintenance and may rut in heavy use or wet clay conditions. Asphalt offers a mid-range upfront cost ($3-$7 per ft2) and smoother driving surface with periodic sealing and patching; it performs well under rural traffic loads but can soften in extreme heat without proper mix and base. Concrete is most durable ($6-$12 per ft2) and long-lasting when properly engineered, but it is expensive upfront and may crack on reactive clay soils unless the base and reinforcement are designed for local conditions.

Natural aggregates vary by region, so color and texture differences are common for White Oak-sourced materials. If the material differs significantly from your order or the product description, contact Hello Gravel customer service promptly with photos and your order number so we can work with the supplier to resolve the issue. Review our refund and issue policies linked in your order confirmation for next steps.

Order through Hello Gravel's website by entering your zip code, selecting the gravel type and quantity (minimum 3 tons), and choosing a delivery date; next-day delivery is possible for orders placed before noon CST for an extra fee. In Order Notes specify preferred drop location, any access concerns (gates, low-hanging lines), and whether you are requesting tailgate spreading (driver will assess safety and availability). Our team is available at 855-241-8884 or text 844-407-3734 for help selecting materials or estimating quantities.