Gravel in Silsbee, TX

Hello Gravel connects you with local quarries, landscape supply yards, and independent haulers serving Silsbee and surrounding West Texas areas. Deliveries are made by contracted dump truck fleets (typically tri-axle) and availability varies by zip code; enter your address on our site or call our team to see local supplier options and pricing.

For Silsbee's climate, angular crushed stone or crushed limestone (3/4u0022 to 1u0022) perform well because they lock together and resist displacement during storms. Pea gravel is fine for decorative areas but can wash out on drives unless contained; recycled concrete is cost-effective for bases but may require a new top layer for fines and appearance.

In West Texas markets near Silsbee, expect delivered gravel prices roughly $25 to $60 per ton depending on type and distance, and decorative gravels trend higher. For a 3u0022 finished depth, that usually works out to about $0.30 to $0.80 per square foot; Hello Gravel shows exact pricing when you enter your zip code and desired material.

Measure length and width to get square feet, choose depth in inches, then use cubic yards = (square feet * depth in inches) / 324. Multiply cubic yards by about 1.4 to convert to tons. Example: a 12' x 40' driveway (480 sq ft) at 3u0022 needs 480*3/324 = 4.44 cubic yards, or about 6.2 tons, so order at least 7 tons to allow for compaction and waste.

For driveways, use a compacted base of 4u0022 to 6u0022 of crushed rock (angular base) plus a 2u0022 to 3u0022 wearing layer of gravel; compact each layer well with a plate compactor or roller. Add geotextile fabric, positive slope for runoff, and edging; in flood-prone spots increase base to 6u0022 to 8u0022 and improve drainage to reduce washouts.

Recycled aggregate (crushed concrete) is usually cheaper and widely available near Texas towns, and it compacts well as a base material. It can contain more fines and variable color, so it is best for sub-bases or rural driveways rather than decorative top layers; expect savings of roughly 10% to 30% versus new stone depending on local supply.

Local rules vary; Silsbee city ordinances and individual HOAs can have standards for driveway surfacing, front-yard appearance, and drainage. Before ordering, check with Silsbee City Hall or your HOA covenants; Hello Gravel can also help confirm typical approvals in your area but cannot waive permit or HOA requirements.

Plan to regrade and refill low spots once a year to every few years depending on traffic and storm exposure, and add a top dressing of 1 to 3 inches every 2 to 4 years for typical residential use. Routine costs are small compared with paving: expect occasional delivery of 1 to 3 tons for patching or topping, plus line-item costs for regrading if you hire a contractor.

Gravel has much lower upfront cost and is easier to install and repair on rural properties; typical installed gravel costs are a fraction of asphalt and concrete. However, gravel requires more regular maintenance (regrading and topping) and can be vulnerable to washouts, while asphalt or concrete have higher upfront cost but less frequent maintenance and better durability for heavy use.

Contractors typically source pea and decorative gravel from regional landscape supply yards, local quarries, and recycled materials yards serving the Silsbee area. Decorative and pea gravels commonly cost 10% to 50% more than base stone; expect pea gravel and specialty colored gravels in the $35 to $80 per ton range versus $25 to $60 per ton for standard crushed stone, depending on distance and availability.