Gravel in San Augustine, TX

Expect a wide range: roughly $18 to $45 per ton or about $25 to $65 per cubic yard, depending on type (pea gravel, crushed limestone, bankrun), local supplier pricing, and trucking distance. Hello Gravel has a 3-ton minimum order and standard delivery generally within 2+ business days; next-day delivery is available for orders placed before noon CST for an extra fee. Local factors like quarry distance and seasonal demand can push prices toward the high or low end of the range.

Crushed limestone (crusher-run) and crushed concrete are the most common base materials for driveways and rural roads because they compact well and provide a stable surface. Pea gravel is good for decorative drives or walkways but does not compact as tightly and can shift, while bankrun or roadbase mixes are often used for rural roads as an economical, structural layer. In local West Texas conditions, choose a crushed base that compacts and a top dressing (3/4u0022 minus or similar) for a durable surface.

Exact suppliers vary by zip code; Hello Gravel connects you with local quarries and haulers that serve the San Augustine area. Typical delivery trucks are tri-axle dump trucks carrying about 10 to 14 tons; some haulers also use 6-axle or belly-dump trucks for larger jobs. Many suppliers accept the Hello Gravel 3-ton minimum, but individual quarries may set higher minimums for remote deliveries—ask for truck type and minimums when you request a quote.

Local soils can include clay and loam that hold moisture, so proper subgrade preparation is critical: remove soft spots, install a well-graded base (crusher-run), and use geotextile fabric where soft soil is present to reduce mixing. Provide positive drainage with a crowned profile and side ditches to prevent ponding; poor drainage leads to rutting and washout. For rural roads expect to build a deeper structural section (8u0022 to 12u0022 total) compared with residential driveways.

For most residential driveways, a compacted base of 4u0022 to 6u0022 of crushed base (crusher-run) topped by 1u0022 to 2u0022 of wearing gravel is typical; compact in 2u0022 to 3u0022 lifts using a plate compactor or roller. For heavier-use or rural roads, aim for 8u0022 to 12u0022 of compacted aggregate placed in lifts with a mechanically compacted finish. Proper compaction and lift thickness reduce settling, rutting, and future maintenance needs.

As a rule of thumb, a 1-car driveway (about 10' x 20') at 4u0022 depth needs roughly 2.5 cubic yards or about 3.5 tons. A 2-car driveway (about 20' x 40') at 4u0022 depth needs about 10 cubic yards or roughly 14 tons. Increase these totals for deeper base sections, wider approaches, or if you plan to add a thicker compacted base for heavy vehicles.

Installation rates vary by scope, but for full driveway installation (grade, geotextile, base rock, and compaction) expect roughly $2.50 to $6.00 per square foot, depending on site access, haul distance, and local labor rates. Simpler deliveries with homeowner-installed spreading will only carry material costs and delivery fees; full-service installation includes excavation, grading, fabric, and compaction. Get site-specific bids through Hello Gravel to compare local contractor pricing.

Common issues are washouts from heavy rain, rutting from vehicles, and weed growth in the surface layer. Reduce problems by keeping proper crown and drainage, grading or regrading annually, adding fresh top dressing as needed, and using geotextile fabric where subgrade is weak. For lower long-term costs consider occasional light grading, targeted repairs after storms, and using a coarser compacting base under a finer wearing layer.

Permit and HOA rules vary: some county or subdivision regulations specify driveway surfacing, setback, or drainage requirements, and rural county roads may have standards or maintenance obligations. Check with San Augustine County permitting or your HOA before installation to confirm any requirements, permit fees, or long-term maintenance responsibilities. If you are unsure, Hello Gravel can help you identify local requirements when you request a quote.