Gravel in Mart, TX

A tri-axle dump truck typically carries about 10-14 tons of gravel, depending on the material. Delivered cost varies with material and distance, but using a conservative West Texas range of $35-$75 per ton, a full truckload (about 12 tons) would run roughly $420-$900, plus any special delivery fees. Hello Gravel has a 3-ton minimum and often shows delivery options and exact pricing at checkout, so get a local quote for a precise number. Prices can change with material type, haul distance, and availability.

Yes, you can order gravel by the ton through Hello Gravel, but our minimum order is 3 tons. In West Texas (including Mart) common gravel typically ranges about $35-$75 per ton delivered, depending on stone size, quality, and distance from the supplier. For exact per-ton pricing for your zip code, use our checkout or request a quote so we can factor local suppliers and delivery into the price.

If you need 3 tons or more, bulk delivery is usually most convenient and cost-effective because Hello Gravel handles coordination and delivery. For very small jobs under 3 tons, renting a pickup or buying a small bagged amount from a local yard may be cheaper, but you must factor in time, truck rental, and loading. Also check whether local suppliers offer low-cost pickup rates near Mart before deciding.

Assuming a common single-car width of 10 ft and a 2u0022 depth, a 20 ft by 10 ft driveway needs about 1.6 tons (roughly 1.24 cubic yards). Because Hello Gravel has a 3-ton minimum and you should allow 10-15% extra for compaction, you would typically order 3 tons; at $35-$75 per ton that material cost would be about $105-$225 delivered. If you prefer a thicker 3u0022 top layer for better durability, expect about 2.4 tons needed before rounding up to the minimum order.

Two inches is a light top-dressing and can work for a decorative surface or low-use path, but it is usually too thin for a vehicular driveway in West Texas; 3-4 inches of compacted top material over a proper base is recommended for regular vehicle use. Material cost for a 2u0022 layer is lower (about 1.6 tons for a 20x10 area), but because Hello Gravel requires a 3-ton minimum, your delivered cost will reflect that minimum; installation labor or tailgate spreading, if available, may add fees. For a durable driveway, budget for more material plus compaction and possible base rock.

A common, durable choice for driveways is a layered approach: 1–2u0022 crushed rock or larger 'road base' for the base, topped with 3/4u0022 crushed stone or decomposed granite for the driving surface. Top-surface gravel like 3/4u0022 is easy to compact and costs in the same general per-ton range as other common sizes, though specialty decorative or colored gravels can cost more. Prices vary by material and local supply; request exact pricing in checkout to see per-ton differences for Mart-area suppliers.

A 10x10 area at 2u0022 depth requires about 0.8 tons (0.62 cubic yards) of gravel. Because Hello Gravel has a 3-ton minimum, delivery pricing will typically be based on that minimum, so material alone will cost roughly 3 times the per-ton price (about $105-$225 at $35-$75/ton), and any tailgate spreading is at the driver's discretion and may incur an extra fee. For very small areas, picking up the exact amount from a local supplier or buying bagged material can be more economical.

Free gravel sources are uncommon near small towns like Mart; occasionally local municipalities or contractors offer clean fill or recycled material, but quality and suitability vary. Hello Gravel often negotiates free or low-cost delivery in many areas, but delivery fees depend on supplier location and haul distance from Mart; the best way to see if delivery is free or discounted is to enter your address at checkout or request a quote. You can also check local classifieds, municipal public works, or nearby landscape yards for occasional deals.

As a rule of thumb, 1 cubic yard of gravel is about 1.3 tons (varies by material), one wheelbarrow holds about 3 cubic feet, and there are 27 cubic feet in a cubic yard. That means one ton is roughly 0.77 cubic yards and equals about 7 wheelbarrow loads. For a 20x20 area at 2u0022 depth you need about 2.47 cubic yards or roughly 3.2 tons, which translates to about 22 wheelbarrow loads; add 10-15% extra for compaction and waste when ordering.

One ton of typical gravel will cover about 125 square feet at a 2u0022 depth (coverage changes with depth and stone density). Yes — always order an extra 10-15% to account for compaction, settling, and minor waste, and round up to Hello Gravel's 3-ton minimum for delivery in Mart. If you need help calculating exact amounts for your driveway, use our material calculator or contact the Hello Gravel team for a zip-code-specific quote.