Gravel in Lytle, TX

Delivered price for 1 ton of gravel in Lytle, TX usually varies by gravel type and supplier; a typical range in West Texas is about $30 to $70 per ton delivered. Exact pricing depends on material (river rock, crushed stone, pea gravel), availability, and delivery distance, so request a zip-code based quote for an accurate price.

Natural gravel often has a lower per-ton price, but crushed stone (like crusher run) compacts better and usually needs less frequent top-ups, which can make it more cost-effective over time. In West Texas soils and heat, crushed stone is frequently recommended for driveways because it locks together and reduces washout, so factor in slightly higher up-front cost for lower long-term maintenance.

Bulk delivery is almost always the most cost-effective option in Lytle if you need more than the 3-ton minimum because the per-ton price falls significantly compared with bagged product. A single dump-truck load is efficient for large projects and keeps handling costs down, while bags are best only for very small jobs or where access prevents truck delivery.

For a 100 ft long by 10 ft wide single-lane driveway, plan about 17 to 18 tons for a 4-inch finished layer, or 36 tons for a 6-inch build-up (estimates use common densities and compacted depths). Hello Gravel can deliver that amount to Lytle—our minimum order is 3 tons and we work with local haulers to schedule dump-truck delivery.

A standard tri-axle dump truck in West Texas typically carries roughly 12 to 18 tons of gravel, and delivered cost will reflect the material price plus haul fees. Expect variability by supplier and material type; contact Hello Gravel with your zip code for an exact delivered price and truck-size options.

A 20 ft long by 10 ft wide driveway at 4 inches deep needs about 3.5 to 4 tons of gravel; material costs could run roughly $100 to $300 depending on the gravel type and delivered price. Add optional compaction or equipment rental (often $60 to $150) and possible small delivery fees; for a firm quote, request a zip-code based estimate from Hello Gravel.

You can lay gravel directly on soil for temporary paths, but for a long-lasting driveway in Lytle we recommend a compacted crushed stone base and a layer of geotextile fabric to prevent mixing and rutting. Local clay and sandy soils in West Texas can cause movement without proper base preparation, so adding a base and fabric reduces maintenance and improves drainage.

Products like crusher run (also called road base) and polymer-stabilized gravels bind and compact into a hard surface that behaves more like a solid pavement than loose stone. Availability depends on regional suppliers, but many West Texas suppliers in our network offer crusher run and some stabilized mixes—enter your zip code or contact our team to see local options.

Yes, common mixes for pavers and patios include paver base blends, concrete sand, and 3/4-inch minus (crusher run) for bedding and leveling. These products go by names like 'paver base', 'concrete sand', or 'paver bedding sand' in our listings; check product details or ask our team to make sure you get the right mix for pavers in Lytle.

Gravel can reduce pest habitat by eliminating damp, organic mulch where bugs and rodents hide; angular gravels like crushed stone or crushed granite also discourage burrowing and drain well. While gravel helps reduce some pests, it is not a complete pest-control solution—combine it with good drainage, sealed foundations, and removing organic debris for the best results.