Gravel in Leon County, TX

Prices in Leon County typically vary by material and supplier; expect roughly $30 to $70 per ton for common gravels (decorative stones are higher). Exact price depends on type, regional availability, and delivery distance. Hello Gravel requires a 3-ton minimum and will show local per-ton pricing and delivery fees when you enter your zip code.

Coverage depends on depth and gravel size, but as a rule of thumb 1 ton of gravel equals about 0.7 cubic yards. That covers roughly 120 square feet at 2u0022 depth or about 60 square feet at 4u0022 depth. For most driveways and pads, plan by depth and round up to meet Hello Gravel's 3-ton minimum.

Three common types are pea gravel (rounded, decorative, good for patios and play areas), crushed stone or crusher run (angular, compacts well for driveways and bases), and river rock (larger, smooth, used for drainage and accents). In Leon County you will see regional variations, so pick crushed stone for bases and pea gravel or river rock for appearance. Ask our team if you want help matching a type to your project.

Sand and gravel are used for concrete mixes, drainage layers, driveway and path bases, and decorative landscaping. In Leon County, gravel is popular for rural driveways, ranch lanes, and drainage swales because it drains well and is locally available. Choose the right gradation: coarse for drainage, mixed fines (crusher run) for load-bearing surfaces.

Costs vary by truck size, load weight, and material. A typical tri-axle delivery carries about 10 to 16 cubic yards (roughly 12 to 20 tons) and total cost is the per-ton price times the tons plus delivery; for example, at $45/ton a 15-ton truckload would be about $675 before fees. Hello Gravel will show available truck options and exact total during checkout for your zip code.

A standard tri-axle dump truck used in our network usually carries about 12 to 20 tons of gravel, depending on local axle limits and the gravel's density. Smaller dump trucks or tandem-axle trucks will carry less. If you need an exact capacity for a specific truck or local road restrictions in Leon County, we can check with the supplier and hauler.

Buying in bulk (per ton) from local suppliers and ordering delivery through Hello Gravel often gives the best value because it reduces per-ton price and delivery costs. Choose common base materials like crushed limestone or recycled concrete when available, as they are usually cheaper than decorative stone. Combine projects or neighbors' orders to meet the 3-ton minimum and lower cost per square foot.

A 7x14 trailer with 2-foot sides has a theoretical volume of about 7.3 cubic yards, but gravel is heavy. Due to trailer payload and towing limits, a safe practical load is often 3 to 4 cubic yards for gravel unless the trailer and tow vehicle are rated for higher weight. Always check your trailer's payload rating and local weight limits before loading gravel in Leon County.

Crushed limestone, road base (crusher run), or recycled crushed concrete are typically the least expensive options for driveways and large-area coverage. Decorative gravels like pea stone or colored rock are usually pricier. Local availability in Leon County affects cost, so recycled or locally quarried base materials are usually the best value.

Yes, you can lay gravel directly on soil for small paths or temporary surfaces, but for a long-lasting driveway you should prepare the subgrade. Clear vegetation, compact the soil, add a geotextile fabric if the soil is soft or clayey, and install 3 to 6 inches of compactable crushed stone as a base before topping with finish gravel. Proper prep reduces rutting and washouts, especially after heavy East Texas rains.

Costs depend on width, depth, and material. As an example, a 20 ft long by 10 ft wide driveway at 3u0022 depth needs about 2 to 3 tons of gravel; with per-ton prices between $30 and $70, material cost would be roughly $90 to $210, but delivery minimums, spreading, and added base work typically raise the total to a few hundred dollars. Use Hello Gravel's calculator and enter your zip code for an accurate local quote and to account for the 3-ton minimum.

Materials called 'crush and run' or 'crusher run' contain a mix of stone and fines that compact tightly and bind together to form a firm surface that behaves more like a solid base than loose stone. Decomposed granite or stabilizer-added gravels and polymer-bound products will also lock up more than loose pea stone. For long-lasting hard surfaces in Leon County, start with a compacted crusher-run base and consider stabilizing products if you need a near-solid finish.

Sharp sand is useful under pavers as a bedding layer, but it is not usually recommended as a base for loose gravel. For gravel you want a compactable base like crusher run or crushed stone; that holds load better and resists migration. If you are installing pavers over gravel, you might use a layer of sand over the compacted base specifically for bedding pavers.

Common dust suppressants are water, calcium chloride, and magnesium chloride, which attract moisture and reduce airborne dust. Soil binders and polymer stabilizers are also used for a longer-lasting result. Note that application and permits may be required in some places, so consult local regulations or a contractor before applying dust control products.

For most gravel installations you do not need sand under the gravel; instead use a compacted crushed stone base and consider a geotextile fabric to separate soil from stone. Sand layers are used for specific applications like paving stones, not for loose gravel surfaces. If you have soft or silty soil in parts of Leon County, a fabric plus base layer will give much better results than sand alone.