Gravel in Greater Third Ward, TX

Prices vary by material and delivery, but in the Texas region around Greater Third Ward a ton of common gravel typically runs between $20 and $60 per ton delivered. Specialty mixes, washed stone, or small decorative gravels can cost more. For an exact quote for your address, check your zip code on our site or request a personalized estimate.

A cubic yard of gravel generally weighs about 1.3 to 1.5 tons depending on stone size and moisture. Hello Gravel has a 3-ton minimum order, which is roughly 2 to 2.5 cubic yards for common crushed stone in this area.

Coverage depends on depth: 1 ton of gravel covers roughly 80 to 100 square feet at a 2-inch depth, and about 40 to 50 square feet at a 4-inch depth. For driveway or pathway planning, work from the desired depth and use our calculator or the rule-of-thumb conversions to estimate needs.

Many full-size pickup beds can hold about 1 cubic yard by volume, but the weight of gravel (1.3–1.5 tons per cubic yard) can exceed your truck’s payload limit. For safety and compliance with local street and weight rules, we recommend professional delivery—plus Hello Gravel’s minimum order is 3 tons, which usually requires a dump truck.

A typical tri-axle dump truck in the area carries about 10 to 12 tons of gravel. Material plus delivery for a single truckload in Greater Third Ward usually falls broadly between $300 and $900, depending on gravel type, exact tonnage, and access fees; request an address-specific quote for accuracy.

For a 100 ft long by 10 ft wide driveway (1,000 sq ft), expect about 9 to 12 cubic yards for a 3u0022 to 4u0022 layer (roughly 12 to 18 tons). Material and delivery costs in Third Ward typically range from about $400 to $1,200 depending on gravel type, compaction needs, and whether you need additional base work or repeated deliveries.

In Houston’s climate, a well-installed gravel surface can perform well for 5 to 15 years, but it needs periodic maintenance like regrading, topping up low spots, and addressing drainage after heavy rains. Frequent vehicle traffic or poor drainage will shorten lifespan, so plan on occasional refreshes every few years.

Yes, next-day delivery is available for orders placed before noon CST, subject to supplier and trucker availability in Greater Third Ward and an additional fee. Our standard delivery window is 2+ business days; you can choose your preferred date at checkout and we’ll confirm scheduling with the local hauler.

Drivers may be able to perform tailgate spreading at their discretion, and you can request it at checkout, but there is no guarantee the driver will be able to do spreading safely. For guaranteed spreading or detailed placement, arrange a paid spreading crew separately or discuss options with our team prior to delivery.

Construction and development in Greater Third Ward can increase local demand for aggregates, which may tighten supplier schedules and push prices up temporarily. Because Hello Gravel sources regionally, we can often match you with local suppliers, but expect occasional variability during busy building periods.

Permit and HOA rules vary by block in Greater Third Ward. Some historic districts or HOAs have material or appearance restrictions, and street-access or drainage work may require city permits—check local ordinances and your HOA before ordering to avoid delays.

Yes. Materials are regionally sourced, so color, texture, and stone mix will reflect local geology around Greater Third Ward. You can add color or appearance notes at checkout, but expect natural variation and contact customer service if you need a specific match.

Confirm the intended drop zone is accessible for a tri-axle dump truck, note overhead wires or trees, check curb/parking restrictions, and verify any required permits. Also measure the area and desired depth so we can recommend the correct tons; if you need help, use our material calculator or contact our team.

Multiply the area (square feet) by desired depth in inches, then divide by 324 to get cubic yards (area * depth / 324 = cubic yards). Multiply cubic yards by about 1.4 to estimate tons for common crushed stone; adjust for local material density and round up for compaction and waste.