Gravel in Georgetown, TX

Local pricing varies by material and haul distance, but typical delivered ranges in the Georgetown/Austin area are: crushed limestone $30–$65 per ton, decomposed granite (DG) $35–$80 per ton, pea gravel $40–$80 per ton, and general crushed stone $30–$70 per ton. Prices can be quoted per cubic yard as well (roughly 1.3–1.6 tons per cubic yard depending on the material). Final price depends on exact product, availability, delivery distance, and any spreading services; use Hello Gravel to get an up-to-date quote for your zip code.

For Georgetown conditions, angular crushed limestone or crushed stone with a mix of fines performs well because it compacts and sheds water while resisting rutting on clay soils. Decomposed granite (DG) can be attractive and compacts nicely for low-traffic driveways but may wash or rut more quickly in heavy rain without a stabilized base. Whichever product you choose, a well-prepared compacted base and proper drainage are critical to long-term performance.

A 12x40 ft area equals 480 square feet; at 3 inches (0.25 ft) you need about 120 cubic feet (4.44 cubic yards), and at 4 inches (0.33 ft) about 160 cubic feet (5.93 cubic yards). That translates to roughly 4.5–6.0 cubic yards, which for most gravel types is about 6.5–9.0 tons depending on the product's density. Hello Gravel’s material calculator can give a precise tons estimate for the specific gravel you select.

Rules vary by location: Georgetown city code, Williamson County rules, and individual HOA covenants can each set standards on driveway surfacing, setbacks, visibility, and allowed materials. Many HOAs and some historic or planned neighborhoods restrict loose rock in front yards or require a paved apron at the road; some permits are required for driveways that alter curb cuts or drainage. Check with Georgetown Planning and Zoning and your HOA before ordering material to avoid compliance issues.

Professional installed gravel driveways in the Austin metro typically run about $1.50–$4.50 per square foot depending on grading, base work, and access; for a 12x40 driveway (480 sq ft) that translates to roughly $720–$2,160. DIY materials-only costs for that same area usually run $300–$900 depending on product and delivery; you will still need compaction equipment and time. Prices vary by contractor scope, site prep needs, and material choice, so get local quotes for an accurate comparison.

For slope protection in the Balcones Escarpment area, use larger angular rock where concentrated flow occurs (riprap or 2–6 inch rock) and medium crushed stone (3/4u0022 to 1-1/2u0022 minus) for surface cover to reduce sheet erosion. Combine gravel with geotextile fabric, terraces, retaining walls, or check dams to slow runoff and protect soil. For seeded slopes, consider a lighter top layer like decomposed granite with erosion control matting to allow vegetation while reducing washouts.

In Georgetown's climate with hot summers and occasional heavy rains, most residential gravel driveways need spot maintenance every 1–2 years and partial replenishment every 2–5 years depending on traffic. Simple maintenance like raking, grading, and adding 1–2 inches of material typically costs $50–$200 for a small job; a delivery and 1–3 tons of new gravel will often run $200–$600. Higher-traffic or poorly drained sites will require more frequent attention and possibly additional base work.

Gravel has the lowest upfront cost and excellent drainage but generally needs more frequent maintenance and replenishment, especially under heavy truck use where rutting and compaction issues occur. Asphalt and concrete have higher initial costs but last longer with less routine maintenance; asphalt typically lasts 15–25 years and concrete 25–40 years when installed correctly. For heavy truck traffic, a properly engineered asphalt or concrete surface often performs better long-term unless you invest in a thick, well-compacted gravel base and frequent upkeep.

The Georgetown area benefits from several limestone and crushed-rock sources in and around Liberty Hill, Round Rock, and other Austin-perimeter quarries that supply aggregates to local contractors. Many regional suppliers and haulers deliver to residential addresses in Georgetown using tri-axle dump trucks, though access, driveway width, and overhang restrictions can limit where trucks can safely offload. Hello Gravel coordinates local suppliers and delivery logistics, so we can check availability and residential delivery options for your address.

Key cost drivers include site grading and excavation, base material and compaction, chosen gravel type, edging or curbing, drainage features, haul distance, and driveway access constraints. For a basic small residential driveway in Georgetown you can expect total installed costs roughly $1,000–$6,000 depending on these factors; more complex jobs with heavy grading or extensive drainage work will be at the higher end. Ask Hello Gravel for an itemized quote so you can compare material and labor line items before committing.