Gravel in Erath County, TX

Prices vary by material and supplier, but in Erath County expect roughly $30 to $65 per ton delivered for common gravels. Costs depend on stone type, local availability, delivery distance, and seasonal demand. For an exact price get a quote on our site or call our sales team with your zip code.

A reasonable range for quality crushed stone or pea gravel in this area is $35 to $60 per ton delivered. Higher-end decorative gravels or specialty mixes can cost more, while recycled or screening materials are usually cheaper. Hello Gravel provides transparent local quotes so you can compare exact prices for your address.

You’ll commonly find crushed limestone, pea gravel, and crusher-run (a mix of stone and fines) available locally. Appearance and size vary with local geology, so color and texture may differ across suppliers. Tell us the project you have in mind and we can recommend the best local option.

For a 20x20 patio base, start with a 3 to 4 inch compacted layer of crusher-run or 3/4u0022 minus crushed stone for good stability and drainage. Add a 1-2 inch layer of pea gravel or washed stone on top for finish if desired. Because Erath County soils can be clayey, proper compaction and a geotextile fabric can help prevent settling.

Dump truck capacity varies, but a common tri-axle truck in our network holds about 12 to 16 cubic yards, which translates to roughly 15 to 25 tons depending on material density. Smaller single-axle trucks carry less — sometimes 6 to 10 tons. We’ll confirm truck size and estimated tonnage when you book delivery.

A full tri-axle load price can range widely depending on material and distance; as an example, delivered loads might run from around $400 to $1,200 in rural Texas markets. Exact cost depends on material type, truck size, and haul distance from the supplier. Get a local quote through our checkout to see accurate pricing for your job.

Coverage depends on depth: one ton of gravel is roughly 0.7 cubic yards and will cover about 230 sq ft at 1 inch depth, 115 sq ft at 2 inches, or 77 sq ft at 3 inches. For common driveway spreading (2-3 inches) expect roughly 75 to 115 sq ft per ton. Use our material calculator for a precise estimate based on your desired depth.

Cost depends on driveway width, depth, and gravel type; for example a 200 ft long by 10 ft wide driveway at 3 inches depth needs about 46 cubic yards or roughly 65 tons. At $35 to $60 per ton, material costs alone could be roughly $2,275 to $3,900, plus hauling and any grading or compaction labor. Contact us for a tailored quote including delivery and local contractor recommendations.

A standard full-size pickup bed can typically hold about 0.5 to 1 cubic yard of loose gravel depending on how high you load it and the truck’s payload limit. Always check your truck’s payload capacity before hauling, because gravel is heavy and can exceed safe limits. If you need more than a small amount, our minimum order is 3 tons and we deliver with dump trucks.

You can lay gravel on soil for short-term solutions, but for a long-lasting surface it’s better to install a compacted base (crusher-run or crushed stone) and a geotextile fabric to separate the soil and reduce mixing. Erath County’s clay-heavy soils can hold moisture and cause settling, so proper grading and compaction are especially important. Ask for local installation tips when you order and consider hiring a loader/compactor if you need help.

Locally, screenings, recycled crushed concrete, or native road base mixes are often the least expensive options because they use fines and locally available material. They work well for base layers or driveways where appearance is less important. If you want a decorative finish, you’ll pay more for washed pea gravel or colored stone.

Gravel alone won’t turn into concrete, but mixes called u0022crusher-runu0022 or stone mixed with fines compacted tightly will lock together and form a firm surface; additives like polymer stabilizers or permeable paving grids can create a hardened, stable surface. Stabilized decomposed granite or products marketed as permeable paving are options if you want a near-solid surface without pouring concrete. We can help match stabilized products to your project and local climate.

A 20x20 (400 sq ft) patio at a 2 inch depth requires about 2.5 cubic yards or roughly 3.5 tons of gravel. Using a material price range of $35 to $60 per ton, expect material costs around $120 to $210, plus delivery and any base work or compaction costs. For a firm, long-lasting patio budget for the base material and installation labor as well; request a quote for an accurate total.

Washed pea gravel or small, angular crushed limestone are good low-maintenance choices because they resist migration and compact well for walkways and borders. Adding a weed barrier and edging helps keep gravel contained and reduces maintenance in Erath County’s mix of grasses and weeds. Periodic raking and topping up after heavy rain are the main upkeep tasks.

A 50 lb bag of gravel contains about 0.48 cubic feet, which covers roughly 6 sq ft at a 1 inch depth and about 3 sq ft at a 2 inch depth. Bags are useful for small projects or touch-ups, but for most yards and driveways bulk delivery is more cost effective. Use bulk orders for larger areas to meet our 3-ton minimum and get delivery scheduled.