Gravel in Cottle County, TX

Prices vary by material and supplier, but in Cottle County expect roughly $25 to $50 per ton for common gravel types delivered to rural properties. Hello Gravel lists clear pricing at checkout and a 3-ton minimum applies; delivery fees or next-day charges can change the final cost. Contact our team or check your zip code for the most accurate, local quote.

One metric tonne equals about 0.79 cubic yards of gravel, so coverage depends on depth: roughly 255 sq ft at 1 inch, 127 sq ft at 2 inches, and 85 sq ft at 3 inches. For planning in Cottle County, choose the depth you need (driveway topcoat vs base) and round up for compaction and waste. If you want, use our material calculator to get a precise local estimate.

One US ton of common gravel is about 0.71 cubic yards and will cover approximately 231 sq ft at 1 inch, 116 sq ft at 2 inches, and 77 sq ft at 3 inches. Coverage changes with stone size and how much it settles after spreading, so these are practical estimates for Cottle County projects. We recommend ordering a bit extra to allow for compaction and irregular ground.

Most tri-axle dump trucks used in our network carry about 10 to 15 cubic yards, which is roughly 14 to 21 tons of gravel depending on rock density. Trucks and payloads vary by hauler in rural Texas, so Hello Gravel will confirm the estimated tonnage for your order when you schedule delivery. If you need a full truckload, we can quote by ton or by truck to match your project size.

Multiply the local per-ton price by the truck's ton capacity to estimate cost; for example, at $35 per ton a 16-ton load is about $560 before any delivery or service fees. Hello Gravel shows delivery options and any additional fees at checkout, and free delivery may apply in many areas. For an exact truckload quote for Cottle County, enter your zip code or contact our team.

Tons depend on width and depth. For a common single-car driveway 100 ft long by 10 ft wide at a 3-inch depth, you would need about 13 tons of gravel (roughly 9.3 cubic yards). If your driveway is wider or you want a thicker base (4-6 inches), expect to order proportionally more material.

Cost depends on length, width, depth, and material type; as an example, a 20 ft long single-car driveway 10 ft wide at 3 inches depth needs about 2.6 tons of gravel, and with our 3-ton minimum you would pay for at least 3 tons. At $30 per ton delivered, that minimum would run about $90 plus any delivery or service fees. Use our checkout calculator or contact support for a precise local price based on your exact dimensions.

With normal use and periodic maintenance—regrading, filling low spots, and adding a top dressing—gravel driveways in Cottle County commonly last 5 to 20 years for the surface layer, while a well-built base can last longer. Local factors like heavy rains, run-off, and traffic accelerate wear, so plan on light maintenance every 1 to 5 years. Proper installation and drainage are the biggest factors in extending lifespan.

Hello Gravel arranges delivery by local dump truck fleets and drivers may offer tailgate spreading at their discretion if it can be done safely. You can request spreading at checkout, but there are no guarantees and the driver will assess conditions on arrival. If you need guaranteed spreading, ask our team about local contractor recommendations before scheduling.

Because Hello Gravel sources regionally, gravel in Cottle County will reflect local geology—color, texture, and stone mix may differ from photos or samples from other parts of Texas. These natural variations are normal and usually fine for driveways, pads, and landscaping, but if appearance is important, add preferences in Order Notes or contact our team for guidance. If the material differs significantly from your expectation, contact customer service and we will work to resolve the issue.