Gravel in Comanche, TX

A full tri-axle dump truck in the Comanche area typically carries about 10-12 cubic yards (roughly 14-18 tons, depending on material). Delivered cost usually ranges from about $400 to $1,200 depending on material type, distance from the quarry, and road access. Hello Gravel has a 3-ton minimum and will provide an exact delivered price when you enter your zip code and material choice.

In Comanche and surrounding West Texas, delivered gravel prices commonly fall between $25 and $60 per ton depending on material (pea stone, crushed limestone, river rock), supplier, and delivery distance. Final price can vary with current quarry rates and haul distance; use our checkout or contact the team for a specific quote.

Buying in bulk (larger truckloads) and choosing locally sourced materials like crushed limestone or recycled crushed concrete are typically the most cost-effective routes in rural West Texas. Picking up material yourself can save delivery fees, and ordering during off-peak times or bundling with nearby projects can reduce per-ton cost. Hello Gravel negotiates local rates and shows delivery options so you can compare prices quickly.

Cost depends on width and depth, but for a single-car 20 ft long by 12 ft wide driveway at a 3u0022 finished depth you need about 2.2 cubic yards (roughly 3.1 tons) for the top layer; at typical prices that top layer may cost $80 to $190 delivered. If you need a full base (4-6u0022 of larger stone plus a 2-3u0022 finish), the total cost can be several hundred dollars more. Use exact dimensions and depth in our material calculator for a precise quote.

Two inches is usually too thin for a driveway surface long-term; it can work as a final dressing over a well-compacted base but will not provide good durability by itself. For a driveway we recommend a structured approach: a 4-6u0022 compacted base of larger crushed stone and a 2-3u0022 finish layer of 3/4u0022 crushed stone or crusher-run. In Comanche's climate good drainage and a solid base are important to prevent rutting and washout.

Locally sourced crushed limestone or recycled crushed concrete are often the cheapest driveway materials in this part of Texas because hauling distances are shorter and supply is common. These options provide good compaction and stability, but they look different than decorative pea gravel and may require a finished top layer if appearance matters. Consider the tradeoff between upfront cost and long-term maintenance when choosing material.

Using a common rule of thumb (1 ton ≈ 1.4 cubic yards), 1 ton of gravel covers about: 450 sq ft at 1u0022 depth, 225 sq ft at 2u0022 depth, 150 sq ft at 3u0022 depth, and 112 sq ft at 4u0022 depth. Coverage changes with gravel density and stone type, so treat these figures as estimates and add extra for compaction and grading.

A 20x20 driveway is 400 sq ft. At a 3u0022 finished depth you'll need about 3.7 cubic yards (roughly 5.2 tons); at typical local delivered prices that top layer might cost about $130 to $320. If you include a thicker base (recommended), expect total material costs to rise accordingly; get a quote through our site for an exact delivered price and scheduling.

For driveway surfaces in Comanche, 3/4u0022 crushed stone or crusher-run (also called 3/4u0022 minus) is commonly recommended because it compacts well and provides a stable surface. Larger, angular base rock (1.5u0022 to 3u0022) is often used below as a base layer, while pea gravel is better for decorative paths but less stable for driveways. Local crushed limestone is a common and appropriate choice in West Texas.

A 10 cubic yard load is about 10 yd3 of material; using 1.4 tons per cubic yard as a rule of thumb that's roughly 14 tons. Delivered cost for a 10-yard load in the Comanche area will vary by material and distance but often ranges from several hundred to over a thousand dollars; Hello Gravel can provide exact pricing when you enter your delivery address and material selection.

Weight varies by rock type and moisture, but a good working estimate is about 1.2 to 1.6 tons per cubic yard. Industry common rule-of-thumb for crushed stone is around 1.4 tons per cubic yard; use this to convert cubic yards to tons when ordering and add a buffer for compaction and waste.

Delivery fees for rural West Texas vary with distance, road access, and truck size; many rural deliveries incur a surcharge. Typical additional fees range from $50 to $200 for longer hauls, but Hello Gravel offers free delivery in many areas and will show any applicable fees at checkout after you enter your zip code. Standard delivery is 2+ business days and next-day delivery may be available for orders placed before noon CST for an extra fee.

Measure the length and width of the area, choose the desired depth in inches, then compute volume: Area (ft2) x Depth (ft) ÷ 27 = cubic yards. Convert cubic yards to tons using about 1.4 tons per cubic yard, then add 10% to 15% for compaction, grading, and waste and round up to meet our 3-ton minimum. If you need help, use Hello Gravel's material calculator or contact our team with dimensions for a quick estimate.