Gravel in Cleburne, TX

Delivered gravel prices in the Cleburne area vary by material, quantity, and distance. Typical material prices for common crushed stone or driveway mix run about $25 to $60 per ton, and delivery is free in many areas but can add $50 to $150 where fuel or distance surcharges apply. Hello Gravel shows local supplier quotes when you enter your zip code and requires a 3-ton minimum order. For an exact price, get a quote through our site or call our team.

A crushed stone base (road base or 3/4u0022 crushed limestone) topped with a 3/4u0022-to-1u0022 crushed stone is a common, durable choice for Cleburne driveways. Use a compacted road base layer to stabilize the clay subgrade common in the area, and top with decorative crushed stone if you want a finished look. Local suppliers often carry limestone mixes suited to Texas climates; check photos and notes at checkout for regional variations.

Crushed limestone handles heat well, but clay subsoils common around Cleburne can shrink and swell, causing rutting or settling if not prepped. A properly compacted base, good drainage, and, if possible, geotextile fabric between soil and gravel will improve performance. Regular maintenance like grading and adding material every few years helps keep the surface stable.

For a 20x20 driveway (400 sq ft): at 3-inch depth you need about 5.2 tons; at 4-inch depth about 6.9 tons; and at 6-inch depth about 10.4 tons. Most homeowners use 3u0022 to 4u0022 for a top layer over a compacted base; new installations over clay often need 4u0022 or more of compacted gravel plus a thicker base. Remember Hello Gravel has a 3-ton minimum order and you can round up to allow for compaction and settling.

Hello Gravel partners with local suppliers and haulers who commonly stock screened gravel and offer delivery to Cleburne and nearby ZIP codes. Enter your ZIP code on our site to see available screened gravel options, local pricing, and delivery details. Suppliers typically deliver by dump truck (tri-axle), and you can request tailgate spreading at checkout though drivers perform that at their discretion.

Gravel is cheaper up front and easier to install yourself, making it a cost-effective choice initially, while asphalt costs more to install but usually requires less frequent basic upkeep. In Cleburne's clay soils and heavy summer rains, gravel will need periodic regrading and topping, so long-term costs can add up. If low annual maintenance and a smooth surface are priorities, asphalt may be worth the higher initial investment; for lower upfront cost and easier changes, choose gravel.

With proper base preparation, drainage, and routine maintenance, a gravel driveway in the Cleburne/West Texas area can perform well for 10 to 20 years before needing major rework. Lifespan depends on traffic, depth, soil type, and how well water is kept off the surface. Expect to add fresh gravel or regrade every 2 to 5 years depending on wear.

Yes, pea gravel is readily available from local suppliers and works well for patios, planters, and walkways in Cleburne because it provides a soft, attractive surface. It is not a great choice for driveways or high-traffic areas because stones shift under tires; use edging and a compacted base to keep it contained. Hello Gravel lists pea gravel options by ZIP code so you can check availability and delivery.

Material costs commonly run $25 to $60 per ton in the area, while delivery may be free or add $50 to $150 depending on distance and supplier. Contractor installation for excavation, base prep, geotextile, and compaction can range widely—commonly $1.50 to $4.00 per sq ft for simple installs and $3.00 to $8.00 per sq ft for more extensive base work. Get multiple local quotes and use Hello Gravel to compare delivered material pricing before hiring labor.

A geotextile fabric is recommended in many Cleburne yards to separate clay soils from gravel, reduce weed growth, and improve drainage and stability. Proper installation requires grading, overlap, and anchoring; a contractor will ensure the fabric is installed correctly, but a capable DIYer can do it if comfortable with site prep. If you have heavy traffic, soft soils, or poor drainage, hiring a pro is a good investment.