Gravel in Burnet, TX

Hello Gravel works with local suppliers and many Burnet deliveries have no separate delivery fee, but costs vary. Typical residential delivery fees in the Burnet area run roughly $0 to $125 for standard drops; next-day service, remote properties, steep driveways, or long-haul loads can add $50 to $200. Always check your zip code and request a delivery quote at checkout for the most accurate price.

Common options near Burnet include crushed limestone, crushed granite, pea gravel, crusher-run, decomposed granite, river rock, and recycled concrete. Crushed limestone is widely used in Central and West Texas for driveways and base layers; crushed granite and river rock are good for decorative beds and heat tolerance; crusher-run and crushed stone with angular particles work best where compaction and stability are needed. Regional availability and color vary due to local geology, so expect some variation.

As a rule of thumb in Burnet projects, expect about 80 to 100 square feet covered per ton at a 3-inch depth and roughly 60 to 80 square feet per ton at a 4-inch depth. Material density and type change coverage a bit: crushed stone and recycled concrete are denser, so they cover toward the lower end of those ranges. Use our material calculator or provide your dimensions for a precise estimate.

Burnet has hot summers and occasional heavy storms that can cause surface migration and minor washouts after intense rain. Heat itself doesn’t damage stone, but repeated wet-dry cycles and runoff can lead to settlement and rutting if the base and drainage aren’t addressed. Proper grading, compacted base, and edge restraint reduce settlement and improve long-term performance.

For drainage near foundations and under drain lines use clean, washed stone such as 3/4-inch crushed stone or pea gravel in perimeter drains because they allow water to flow freely. For driveways, use angular crushed stone or crusher-run on the base to lock up and compact, topped with 3/4-inch crushed or washed stone for surface drainage. Avoid loose pea gravel as the primary driveway surface unless contained by good edging and a solid base.

Permit and HOA rules vary across Burnet city limits and county areas, and some HOAs have strict material or color requirements. Always check with Burnet city planning or Burnet County and your HOA before ordering to confirm setback, drainage, and surface material rules. Hello Gravel can help supply material details you can provide to your local authority or HOA.

DIY costs in Burnet typically include material (often $25 to $60 per ton depending on type), delivery, and equipment rental for grading and compaction; a typical 20x50-foot driveway at 3 inches might need about 10 to 13 tons of material, so material-plus-delivery and rental can range from a few hundred to about $1,200. Hiring a contractor for full installation (grading, base, compaction, and finish) commonly runs higher, often $2 to $6 per square foot depending on scope and site prep. If your site needs heavy grading, drainage work, or permits, contractor costs will increase but you get faster, more consistent results.

Schedule deliveries in Burnet during the drier spring and fall windows to avoid heavy rains and soggy ground that complicate grading and compaction. Summer mornings are fine for material placement, but extreme heat can affect crew availability and working conditions. Order with at least 2 business days lead time for standard delivery or request next-day by noon CST if you need faster service.

In Burnet the most common issues are washouts after heavy storms, rutting from vehicle traffic, stone migration, and weed growth. Plan on light maintenance annually—raking, topping up surface stone, and regrading ruts—and more significant rework every 1 to 3 years depending on traffic and drainage. Adding edge restraints, periodic compaction, and clearing concentrated runoff paths reduces failures and maintenance frequency.

Recycled concrete and crushed reclaimed materials are commonly available in West Texas and they are often priced lower than virgin stone. Typical price ranges in the region put recycled options around 10% to 30% less than comparable virgin limestone or granite, but supply and material quality vary by supplier. If you want recycled material, request product photos and specification notes in your order notes so you get the right fit for your project.

Angular, crushed materials like crusher-run and 3/4-inch crushed stone compact well and create a stable surface for driveways and high-traffic areas, while rounded materials like pea gravel are better for aesthetics and low-traffic beds but tend to migrate. Denser materials cover slightly less area per ton, so plan quantities accordingly. For Burnet's occasional heavy storms and variable soils, choose a compactible base material, proper depth, and edge containment for the best long-term results.

Use Hello Gravel’s website to choose material, specify your Burnet address, and select a delivery date; our checkout shows available delivery windows for your zip code. Note access details in Order Notes (driveway width, gate height, obstacles, preferred drop area) and request tailgate spreading if you want the driver to consider it, understanding it is done at their discretion. For questions call 855-241-8884 or text 844-407-3734 for help with material selection and quantity calculations.