Fill-dirt in Oneida, TN

Fill-dirt is native soil (typically clay, sand, or a mixture) used to raise or level ground rather than as a finished surface. In Oneida and West Tennessee you would use fill-dirt to build up low spots, bring grade up for foundations or landscaping, or as a bulk material under a structural base. It is not a recommended final driving surface — top with a structural base like crusher run and a surface gravel for driveways.

Calculate volume by multiplying area by depth. For example, a 2-car driveway about 20 ft wide by 20 ft long is 400 sq ft; at 6 inches (0.5 ft) that is 200 cubic feet or about 7.4 cubic yards. Fill-dirt typically weighs about 1.2 to 1.4 tons per cubic yard, so plan roughly 9 to 11 tons and add 10-15% extra for compaction and settlement.

Prices vary regionally and with supplier, but in West Tennessee fill-dirt often runs lower per ton than quarried rock because it is an abundant native material. Expect local price ranges and delivery fees to fluctuate; check Hello Gravel for live pricing by entering your zip code or contact our sales team for an accurate delivered price for Oneida.

Hello Gravel connects you with local suppliers and contracted dump-truck haulers that serve Oneida and surrounding West Tennessee communities. Because supplier availability changes, the fastest way to see local options is to enter your zip code on our site or contact our sales team and we will show trusted suppliers that can deliver to your address.

Fill-dirt can work in Oneida's clay-rich environment when properly placed and compacted, but native clays can hold moisture and shrink/swell. Install fill in 4- to 6-inch lifts and compact each lift with a plate compactor or roller to reach a firm, stable surface; for building pads or structural work, have a local engineer or contractor specify required compaction level and test results.

Fill-dirt is good for bulk raising and grading but does not provide the load-bearing, drainage, and interlock properties needed for a durable driveway base. Crusher run or quarry-run are crushed rock mixes that compact tightly and make better structural bases; a common approach in Oneida is to use fill-dirt to set grade and then cover it with 4 to 8 inches of crusher run before a surface layer of gravel.

Hello Gravel has a minimum order of about 3 tons and standard delivery lead time of 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Rural deliveries around Oneida may carry additional charges depending on distance and truck routing; exact fees and availability will appear at checkout after you enter your address.

Longevity depends on use, drainage, compaction, and climate. Poorly compacted or exposed fill-dirt can settle and erode within months to a couple of years, while properly compacted fill under a structural base can remain stable for many years; maintenance such as regrading and adding surface material may be needed after heavy rains or frost-thaw cycles common in West Tennessee.

Permit needs vary by project and location, so check Oneida city offices or Scott County building and health departments for specific rules on fill for building pads and septic access. Erosion control like silt fence, straw coverage, and temporary seeding is commonly required or strongly recommended to prevent sediment runoff, and building pads often call for 6 to 12 inches of compacted structural fill unless local code or an engineer specifies otherwise.

On slopes, work in benches or terraces rather than placing thick uniform fills, keep lift thickness to 4 to 6 inches and compact each lift, and use erosion controls like geotextile, retaining walls, or vegetation to stabilize the slope. Also direct surface water away from newly placed fill with proper grading and temporary channels to reduce erosion during the first rainy seasons.

Many local contractors and landscapers around Oneida provide hauling, spreading, and compaction services, and Hello Gravel can help connect you to providers. Labor and equipment rates vary with job size and complexity; small jobs may be quoted by the hour while larger projects are often priced per cubic yard or per truck, so get multiple quotes and ask suppliers if they can bundle material and installation.