Fill-dirt in Saltillo, TN

Fill dirt is mostly natural soil, sand, and small fines used to raise grade or fill holes; it compacts well but does not provide a stable wearing surface. Gravel (crushed stone or crushed rock) is angular, drains better, and creates a stable base and driving surface. For a driveway in Saltillo you would typically use compacted fill dirt to build or level the subgrade, then cover it with a compacted gravel base and surface for durability and drainage.

Local prices vary, but fill dirt in West Tennessee typically ranges from about $10 to $25 per ton delivered, depending on supplier, distance, and site access. Rural deliveries around Saltillo (population 550) can be on the higher end due to haul distance or difficult access. Get a zip-code quote on checkout for the most accurate price.

On a per-ton basis, fill dirt is usually cheaper than gravel because it is lower-grade material. However, fill dirt alone will not make a durable driveway surface, so you still need gravel or crushed stone on top, which increases the total cost. For a long-lasting, low-maintenance driveway, plan to budget for both compacted fill dirt (for grade) and gravel (for the base and surface).

As an example, a 20 ft long by 10 ft wide driveway (200 sq ft) with 6 inches of compacted fill dirt requires about 3.7 cubic yards (roughly 4 to 5 tons) of fill dirt and 3 inches of gravel on top needs about 1.85 cubic yards (about 2 to 3 tons). Using typical regional prices, delivered fill dirt might cost roughly $40 to $125 and delivered gravel about $50 to $135, so materials alone could run roughly $100 to $260. This example covers material only; labor for spreading, compacting, and any hauling fees may add to the total.

A single small delivery (a few cubic yards) might be quoted in the $100 to $300 range, while a full tri-axle dump truck (about 10 to 12 cubic yards) typically runs between $250 and $700 delivered in West Tennessee. Price depends on travel distance, load size, site access, and any offloading difficulty. Hello Gravel shows delivery options and fees at checkout based on your zip code.

Physically, one cubic yard of loose dirt is about the size of a 3 ft by 3 ft by 3 ft box and can sometimes fit in a pickup bed, but the weight often exceeds a standard pickup's safe payload. A typical half-ton pickup has a payload around 1,500 lb, while 1 cu yd of damp fill dirt can weigh 2,000 lb or more. For anything heavier than a small bag or light load, or for more than 1 cu yd, a dump truck delivery is recommended for safety and convenience.

One cubic yard equals 27 cubic feet and is roughly a 3 ft by 3 ft by 3 ft pile. It will cover about 108 square feet at a 3-inch depth, about 54 square feet at a 6-inch depth, and about 27 square feet at a 12-inch depth. In tons, one cubic yard of fill dirt typically weighs about 1.1 to 1.4 tons depending on moisture and compaction, so use that to convert between cubic yards and tons for ordering.

Most local suppliers that Hello Gravel partners with deliver fill dirt via dump trucks to Saltillo addresses, but spreading and compaction are offered at the driver's discretion and are not guaranteed. You can request tailgate spreading at checkout, but if you need guaranteed spreading or compaction, hire a local contractor or ask the supplier in advance to confirm availability. Always note driveway width, overhead wires, slope, and photos in your order to help suppliers assess whether spreading is feasible.

Hello Gravel maintains a minimum order of 3 tons, which often covers small yard projects in Saltillo. Delivery fees vary: many areas have free delivery, but rural locations or long-haul drops around Saltillo may incur additional fees. The checkout process will show any delivery charges and available delivery dates for your zip code.

Suppliers typically need the delivery address or zip code, the quantity needed (tons or cubic yards), preferred delivery date, and any access constraints (driveway width, overhead lines, steep slopes). Photos of the drop area, gate codes, and whether you want spreading or offloading in a specific spot help produce an accurate quote. Providing these details upfront speeds ordering and reduces the chance of surprise fees.