Fill-dirt in Hampshire, TN

Fill-dirt is soil with minimal organic material used to raise grade, build pads, or fill holes. In Hampshire, TN, homeowners commonly use it to level yards, build a base for driveways or garage pads, and raise low spots that collect water. It is not the same as topsoil and is not ideal for planting unless mixed with organic soil.

Typical delivered prices in small West Tennessee towns like Hampshire run about $8 to $20 per cubic yard (roughly $6 to $14 per ton), depending on distance from the supplier, truck minimums, and moisture. Exact pricing varies by supplier and delivery access, so get a quote and check Hello Gravel for local supplier rates.

Common uses include raising low spots to improve drainage, building level pads for sheds or garages, prepping base for driveways, correcting yard grade before sod, and filling trenches or holes. Contractors also use fill-dirt to bring sites up to grade before structural work.

Yes. Hampshire sits in West Tennessee’s humid subtropical climate where native soils often include clay with high shrink-swell potential and seasonal wetness after heavy rains. That means you should consider compaction and drainage when importing fill-dirt, and avoid using organic topsoil as structural fill.

For most home projects, place fill-dirt in 6 to 12 inch lifts (loose depth) and compact each layer before adding the next. Contractors typically aim for firm compaction; for structural fills under foundations or heavily loaded areas they may target 90 to 95 percent of standard compaction and follow an engineer’s guidance.

Contractors calculate cubic yards with length x width x depth (in feet) divided by 27, then convert to tons using a local conversion factor (a common rule of thumb is about 1.2 tons per cubic yard for fill-dirt). For example, a 12 ft by 100 ft driveway at 4 inches deep is about 14.8 cubic yards, or roughly 18 tons using the 1.2 factor.

Choose fill-dirt when you need to raise grade or build structural support because it compacts well and is low in organic matter. Use crushed stone or gravel for drainage and load-bearing surfaces like driveways, and topsoil where you plan to plant turf or gardens. In Hampshire’s clay soils, a combination of engineered fill and proper drainage is often the best approach.

Local requirements vary. For building pads, septic systems, or any work that affects drainage or floodplains in Hardeman County, check with the county planning office and the local health department before placing large volumes of fill. Septic and foundation fills often require engineered plans or approvals.

Most local suppliers deliver by dump truck; some contractors or suppliers offer spreading and compaction for an extra fee, but it is not guaranteed. With Hello Gravel orders, you can request tailgate spreading at checkout, but drivers perform that service at their discretion and it is not guaranteed—plan to hire a local contractor for controlled spreading and compaction if you need it done to spec.

Because Hello Gravel sources materials locally, the color, texture, and clay content of fill-dirt in Hampshire will reflect West Tennessee geology. Expect some variation from photos and samples; if color or composition matters, add notes to your order and ask suppliers for specifics before delivery.

Yes. Spring and late fall can be wetter in Hampshire, causing deliveries to be muddy or harder to compact on arrival. Schedule deliveries during drier weather when possible, ensure good truck access, and allow time for proper drying and compaction between lifts.

Measure the area and calculate cubic yards with the length x width x depth / 27 formula, then get a local price quote and confirm minimums and delivery access with suppliers. If your project is structural or related to septic or drainage, consult the county offices or an engineer and plan for professional spreading and compaction if required.