Fill-dirt in Chapel Hill, TN

Yes, fill-dirt is generally cheaper than gravel because it is a low-cost inert soil used to raise grade rather than a screened or crushed aggregate. In West Tennessee and around Chapel Hill, typical delivered prices for fill-dirt are usually lower per ton than decorative or crushed gravel, but final cost depends on local supply, hauling distance, and order size. Get a quote through Hello Gravel to see current local pricing and to factor in the 3-ton minimum order.

Prices vary seasonally and by supplier, but in West Tennessee fill-dirt commonly ranges from about $15 to $40 per ton delivered, depending on quantity and access. A typical tri-axle dump truck in our network carries roughly 10 to 14 cubic yards (about 10 to 20 tons for fill-dirt, depending on density), so a single truckload will vary in cost accordingly. Contact Hello Gravel for an exact, location-specific quote and note our minimum order is 3 tons.

Fill-dirt is mostly subsoil or inert earth used to raise or level ground and provide a base for structures or landscaping; it compacts but does not provide surface drainage. Gravel is crushed rock or aggregate used for drainage, driveways, and finished surfaces because it sheds water and supports traffic. For Chapel Hill yards, use fill-dirt to build up low spots and gravel where you need a stable, draining surface.

Yes, fill-dirt is commonly used to level low spots and regrade yards, but it should be placed in layers and compacted to avoid future settling. In West Tennessee, soils can be clayey and hold moisture, so compacting each lift and checking grade after settling (often several months) helps avoid uneven spots later. If you need a finished surface or drainage, top with topsoil or gravel as appropriate.

Coverage depends on the depth you need: one cubic yard covers 324 sq ft at 1 inch depth. Because fill-dirt densities vary, one ton is roughly 0.6 to 0.8 cubic yards, so one ton will cover about 200 to 260 sq ft at 1 inch depth. A typical tri-axle truck delivering 10 to 14 cubic yards will therefore cover roughly 3,240 to 4,536 sq ft at 1 inch depth, with less coverage at greater depths.

You can put gravel over fill-dirt, but it works best if the fill-dirt is properly graded and compacted first to minimize future settling and washouts. In West Tennessee's wetter months, uncompacted fill can settle or shift under gravel, leading to ruts. For driveways or paths, compact the fill-dirt, add a geotextile if needed, then place base gravel before the top layer.

No, 2 inches of fill-dirt is usually not sufficient for most leveling or base work because it will not allow for proper compaction and can settle over time. For regrading lawns or prepping a driveway, plan on multiple inches per lift (often 4 inches per lift compacted) and several lifts if you need significant build-up. For driveways, fill-dirt is a base material only; you will need several inches of compacted aggregate on top for a durable surface.

Multiply area by depth to get cubic yards: 1,000 sq ft at 1 inch depth is about 3.09 cubic yards, and at 6 inches it's about 18.5 cubic yards. Expect fill-dirt to shrink some after compaction and settling, so order 5% to 15% extra for settling and compaction. Use Hello Gravel's material calculator or call our team to get a region-specific estimate and factor in our 3-ton minimum.

No, fill-dirt will not harden like concrete; even well-compacted fill remains soil and can shift, erode, or settle over time. If you need a hard, load-bearing surface, consider stabilized base products or a concrete/asphalt finish; fill-dirt is only appropriate as a structural fill or leveling material. In Chapel Hill's climate, proper compaction and drainage are important to keep fill-dirt stable.

Yes, fill-dirt can be used to build up low spots under a future gravel driveway, but it should be placed and compacted in lifts and followed by a compacted aggregate base layer for strength and drainage. In West Tennessee, a geotextile fabric between fill and base aggregate can help prevent mixing of soils. Remember fill-dirt alone does not provide a durable driving surface—add several inches of compacted crushed stone on top.

Standard delivery is typically 2+ business days, and next-day delivery is available for orders placed before noon CST with an additional fee, subject to supplier and truck availability. Deliveries are made by local contracted dump truck fleets (usually tri-axle) and tailgate spreading is at the driver's discretion. Enter your zip code on our site or contact our team to confirm timing for Chapel Hill.

Chapel Hill is in West Tennessee where soils often contain clay and silt that retain moisture; that affects compaction and drainage. When buying fill-dirt here, plan for extra compaction, slower drying after rain, and possibly adding coarse material or drainage features for areas that need to shed water. Our suppliers can advise on locally sourced fill-dirt characteristics and best practices for your project.