Fill-dirt in Bartlett, TN

Delivered fill dirt prices in the Bartlett/Memphis area vary by supplier, depth, and material quality, but expect a rough range of $20 to $45 per cubic yard (about $15 to $35 per ton) delivered. Exact pricing depends on your zip code, truck access, and whether you need screening, extra handling, or tailgate spreading. Use Hello Gravel’s checkout or call our team for a precise, location-based quote.

For 1,000 sq ft: 3u0022 depth requires about 9.3 cubic yards (roughly 11 tons), 6u0022 needs about 18.5 cubic yards (about 22 tons), and 12u0022 needs about 37 cubic yards (about 44 tons). These estimates use a rule-of-thumb density of 1.2 tons per cubic yard; always round up and add 5%–10% for compaction and settlement.

Hello Gravel’s minimum order is 3 tons, and many local suppliers and haulers in Bartlett follow similar minimums. Small-load delivery or smaller minimums may be available from some local vendors but often carry additional fees (commonly $50–$150 or more) and are subject to truck type and access. Grading and compaction are typically offered by local contractors rather than material haulers; request these services early so we can coordinate with the right local provider.

Fill dirt is a good, low-cost option to raise grade, fill low spots, and prepare yard areas for turf or planting when followed by a layer of topsoil. For driveway bases, fill dirt can be used as a compacted subgrade, but it is not a substitute for crushed stone or base rock, which provide drainage and load-bearing capacity required for vehicles. For driveways in the Memphis climate, plan on compacted fill dirt under a layer of class II/road base or crushed stone for best results.

Material-only, fill dirt is usually cheaper per cubic yard than crushed gravel or base rock. However, for structural bases (like driveways), the gravel and base rock you need on top of a compacted subgrade are necessary, so the total installed cost can be higher than using only fill dirt. Compare quotes that include delivery, compaction, and any required engineered base—Hello Gravel can provide local pricing so you can compare total project cost.

If your existing soil is firm, level, and not organic topsoil, you can often install gravel directly after grading and compaction. Soft, organic, or wet soils typically need excavation, replacement with compacted fill dirt, or additional engineered subgrade before gravel to prevent settlement. Local prep costs vary by scope; small grading jobs may be a few hundred dollars while full excavation and rework can run into the low thousands—ask Hello Gravel for referrals to local contractors for firm cost estimates.

For a 20-foot-wide driveway, use compacted structural fill (clean fill dirt) as a subgrade topped with 4–6 inches of class II road base or crushed stone, and then a driving surface (additional crushed stone or paving). Material and delivery for the fill plus base rock will vary, but expect material-only costs to commonly range from several hundred to a few thousand dollars depending on driveway length; adding compaction and contractor labor typically increases installed costs. Contact Hello Gravel with your driveway dimensions for a tailored material and delivery quote and we can suggest local contractors for installation pricing.

One cubic yard (27 cubic feet) of fill dirt covers about 108 square feet at 3u0022 depth and about 54 square feet at 6u0022 depth. Using a rule-of-thumb density of 1.2 tons per cubic yard, one ton of fill dirt covers roughly 90 square feet at 3u0022 and about 45 square feet at 6u0022. Always allow for compaction and order a little extra to account for settlement.

Weed growth depends on organic content and seed sources: typical fill dirt has lower organic matter than topsoil and is less likely to support dense turf, but weeds can still establish from seed or adjacent vegetation. Many suppliers in the Memphis/Bartlett area offer screened or low-organic fill-dirt options that reduce weed and root material; if you plan to landscape, place a layer of topsoil over the fill or use landscape fabric where appropriate. Add a weed control or mulching plan after installation for best results.

Yes—engineered fills include properly compacted structural fill, geotextile reinforcement, and treatments like cement or lime stabilization for highly load-bearing applications. These methods create a much firmer, longer-lasting base than loose fill dirt but increase material and installation costs; they can be a cost-effective alternative to full concrete or asphalt when designed correctly. For driveway or structural work in Bartlett, consult a local engineer or contractor to determine whether engineered fill is needed; Hello Gravel can deliver the specified material once you have a plan.