Fill Dirt in South Scappoose, OR

Delivered price for screened fill-dirt in West Oregon (South Scappoose) varies with supplier, distance, moisture, and order size. Expect a typical range of about $15 to $40 per ton delivered for most residential orders, with lower unit pricing on larger loads. Hello Gravel shows local options and upfront pricing when you enter your zip code; delivery fees or long-carry charges can add to the total.

Hello Gravel connects you with local aggregate yards and haulers that service the South Scappoose area, typically sourced from Columbia County and nearby Portland-metro suppliers. We recommend entering your zip code on our site to see current, vetted suppliers and delivery estimates for screened fill-dirt. If you need a specific product (screened, low-organic, or compactible fill), add notes to your order so suppliers can match availability.

One cubic yard of fill-dirt generally weighs about 2,400 to 2,800 lb, or roughly 1.2 to 1.4 tons, depending on moisture content and particle makeup. Loose topsoil or silty fill will be lighter; wet or compacted material will be heavier. Use 1.3 tons per cubic yard as a practical rule of thumb when estimating materials for South Scappoose projects.

Permits may be required in Columbia County for placing large volumes of fill, changing site grades, or working near streams and wetlands. Small landscaping fills usually do not need a permit, but work in regulated riparian zones, floodplains, or sites that affect drainage often does. Contact Columbia County Planning and Building and, if wetlands or streams are involved, the Oregon Department of State Lands to confirm local requirements before ordering large quantities.

For non-structural fill, use screened, low-organic fill-dirt placed in lifts of 6 to 12 in and compact each lift to a firm, even density; aim for 90% of standard Proctor where tested for landscaping and 95%+ for structural fills under buildings. In West Oregon's wet freeze-thaw conditions, prefer well-draining granular fill where possible and avoid high-organic topsoil as structural fill. Control moisture during placement: too wet reduces compaction and frost susceptibility, too dry limits compaction efficiency.

Typical small residential jobs use a tri-axle dump truck to deliver material, a 1–2 ton excavator or skid steer to spread, and a plate compactor or small vibratory drum roller to compact lifts, with a crew of 2–3 people. Larger lot-raising jobs may use an excavator, loader, and a 5–10 ton vibratory roller with a 3–5 person crew. If site access is tight or soft, plan for additional labor or equipment to handle long carries or to move material from the road to the work area.

Fill-dirt can provide bulk to raise grades and buttress slopes, but fine silty fill alone can erode in heavy rain if left unprotected. For South Scappoose slopes, use coarser, well-graded fill near slope faces, add rock toe drainage, install erosion control fabric or mats, and seed vegetation promptly to reduce surface erosion. For steeper slopes or near watercourses, combine graded fill with engineered solutions and consult local regulations.

Use screened fill-dirt for raising grade, backfill around foundations, and landscaping where drainage is not the primary structural concern. For driveways and building pads that need load-bearing strength and drainage, choose road base or crusher run (crushed rock with fines) because those materials compact to a stiff, stable surface. In many cases use fill-dirt to build up grade and cap with 4–8 in of road base or crusher run for a durable driveway surface.

Hello Gravel's minimum order is 3 tons; standard delivery usually takes 2+ business days with next-day available for an extra fee if ordered before noon CST. Most deliveries are end-dumped from tri-axle trucks; if you need tailgate spreading, request it at checkout and the driver will assess feasibility on arrival. Expect additional charges for long carries, tight access, soft ground, or if a loader/Bobcat offload is required to get material to the exact placement location.

Yes. Placing fill within wetlands, channels, or riparian buffers in Columbia County is regulated and often requires permits from county authorities and the Oregon Department of State Lands, and may also involve federal permits. Best practices include avoiding direct placement in sensitive areas, using erosion and sediment controls, stabilizing fills quickly with vegetation or matting, and consulting regulators before you order material. If your site is near South Scappoose Creek or mapped wetland, get guidance from county staff to avoid fines or required remediation.