Fill Dirt in Phoenix, OR

In Phoenix, OR, a cubic yard of basic fill dirt typically runs roughly $15 to $35 per cubic yard, depending on local supply and the dirt’s composition. Hello Gravel can deliver to Phoenix when suppliers are available in your zip code; our minimum order is 3 tons (about 2.5 cubic yards) and standard delivery is 2+ business days, with next-day available for orders placed before noon CST. Exact pricing and delivery availability are shown at checkout after you enter your address.

Yes, fill dirt is generally cheaper per cubic yard than decorative or crushed gravel because it is intended for raising grade rather than as a finished surface. However, fill dirt should not be used as the top wearing layer for a driveway or patio: you will typically need a compacted base of crushed stone or gravel on top of fill dirt, which adds cost. For budget grading or raising low spots, fill dirt is a cost-effective choice in West Oregon, but expect to spend more if you need a durable finished surface.

At 6 inches deep (a common grading depth) 1,000 sq ft requires about 18.5 cubic yards. Using a mid-range price of $20/yd for fill dirt, material cost would be about $370, while gravel at $45/yd would be about $830. Add delivery (often included or shown at checkout with Hello Gravel) and spreading/compaction labor or equipment, which can range from a few hundred to $1,000+ depending on access and local contractor rates; these are estimates—get a personalized quote for exact costs.

Most dump trucks working with Hello Gravel are tri-axle trucks that typically deliver about 10 to 12 cubic yards of loose material per load, while smaller single-axle trucks carry roughly 6 to 9 cubic yards. Fill dirt weight varies, but a rule of thumb is about 1.1 to 1.4 tons per cubic yard depending on moisture and composition, so a tri-axle load often weighs in the neighborhood of 12 to 18 tons. Exact truck sizes and weight limits vary by supplier and local regulations; we show the truck type and estimated yards on your order confirmation.

You should not place surface gravel directly on uncompacted fill dirt if you want a stable driveway. Best practice is to compact the fill dirt, then install a 4 to 6 inch compacted base of crushed stone (road base), and consider geotextile fabric where drainage or soft soils are a concern. Hello Gravel supplies the materials and can request tailgate spreading at checkout, but we do not perform compaction or fabric installation—hire a local contractor for those services.

Yes, fill dirt almost always needs compaction before building structures, installing hardscapes, or placing a finish surface to reduce future settlement. Hello Gravel coordinates material delivery but does not provide compaction services or equipment rental; drivers may offer tailgate spreading at their discretion but cannot compact with heavy equipment. For compaction, contact a local contractor or equipment rental center in Phoenix, OR to rent a plate compactor or hire a pro who can verify compaction density requirements for your project.

No, 2 inches of fill dirt is not sufficient for a driveway. For grading low spots, 2 inches is a thin layer and will settle; for a driveway you should plan on compacted fill plus a 4 to 6 inch compacted crushed-rock base and the appropriate surface material. If you only need slight leveling for lawn or planting, 2 inches may help, but it is not suitable for load-bearing surfaces.

For a 10x10 area (100 sq ft), 4 inches of fill dirt equals about 33.3 cubic feet, or roughly 1.23 cubic yards. Because Hello Gravel has a 3-ton minimum (about 2.5 cubic yards), a direct delivery may exceed the small project needs—check the checkout for smaller supplier options or combine materials with another project. You can enter your Phoenix address on our site to get an exact quote for material, delivery, and any available spreading options.

If you mean a driveway 20 feet long by 10 feet wide (200 sq ft), with a 6 inch compacted base, you need about 3.7 cubic yards of base material; a 4 inch top layer of gravel would add about 2.5 cubic yards. Material costs for fill/base and gravel plus delivery can range from roughly $200 to $1,000 depending on product choice and local rates, and compaction and labor typically add several hundred dollars. These are ballpark figures—get an itemized quote through Hello Gravel and a contractor estimate for compaction and installation for an accurate total.

Fill dirt is great for raising grade but has disadvantages as a finished surface: it settles over time, can retain water if clay-rich, and does not provide a durable, wear-resistant surface for vehicles or foot traffic. For finished surfaces in West Oregon we recommend a compacted crushed-rock base topped with crushed stone, crushed gravel, or decorative gravels designed for pathways and driveways—these provide drainage and durability. Hello Gravel stocks a range of base and surface aggregates; check our site or contact our team to find the right product for Phoenix conditions.