Gravel in Portland Heights, OR

Prices change by supplier, material type, and season, so there is no single fixed rate. For up-to-date per-ton and per-cubic-yard pricing in Portland Heights, use Hello Gravel’s product pages or request a local quote through our site; quotes include delivery and any local fees.

Hello Gravel works with multiple local suppliers and haulers serving Portland Heights; supplier availability varies by zip code. Typical minimums follow Hello Gravel’s platform policy (3 tons) but individual suppliers may set different minimums or access fees for steep or tight sites, so check your quote for specific minimum order and delivery fee details.

For steep, clay-rich slopes in Portland Heights use angular, interlocking rock such as 3/4u0022 crushed rock or 3/4u0022 minus crushed stone as the wearing surface, combined with a coarser base (1-1/2u0022 minus or crushed rock) and good drainage. Avoid loose rounded pea gravel on slopes because it can roll and migrate; decomposed granite can bind but may wash out without good edge restraints and drainage.

Portland and Multnomah County encourage low-impact development and have stormwater guidance that may affect driveway and infiltration system design. For specific credits or permit requirements in Portland Heights, check the City of Portland Bureau of Environmental Services or your county stormwater office and confirm with your HOA before installing an infiltration system.

Delivery costs often increase for tight access, steep driveways, narrow streets, or setups that require smaller trucks or extra handling. Drivers may assess access on arrival and additional fees or delivery restrictions can apply, so send photos of your site at checkout or contact our team to get an accurate delivery estimate.

Installation costs depend on site prep, depth, base material, access, and local labor rates; small, straightforward driveways often cost less than steep or hard-to-access jobs. As a rough guideline, expect a wide cost range — get multiple local installer quotes and include geotextile, compaction, edge restraints, and drainage work in estimates to compare apples to apples.

Use this quick method: 1 cubic yard covers about 108 square feet at a 3u0022 depth, and one cubic yard of gravel is roughly 1.4 tons (density varies by material). So for 3u0022 depth, expect roughly 0.0095 tons per square foot (for example a 12' x 40' driveway at 3u0022 needs about 6.2 tons); double the depth and double the material required.

Yes — heavier winter rain can move fines, create ruts, and wash material downhill on sloped sites, so Portland Heights properties often need more frequent maintenance than dry-climate sites. Typical maintenance is light regrading annually and topping up 1/2u0022 to 1u0022 of new gravel every 1–3 years depending on use, slope, and local rainfall; well-designed drainage reduces maintenance intervals.

Crushed concrete and recycled aggregate can be a cost-effective choice for base layers and some driveway surfaces in Portland Heights, and many local suppliers offer recycled products. They can save money and perform well structurally, but material consistency, fines content, and local acceptance vary, so inspect samples and confirm suitability with your installer before using recycled material on a finished surface.

For durability and drainage in Portland Heights, use a layered approach: a compacted coarse base (1-1/2u0022 minus or crushed rock) with geotextile, plus a wearing course of 3/4u0022 crushed rock or similar angular aggregate. Add subdrains or swales on steep sites, use edge restraints to hold material on slopes, and avoid purely fine, sandy mixes that can compact and shed water poorly.

Clear a stable staging area for the truck, mark utilities and preferred dump location, and send photos during checkout so suppliers can assess access and equipment needs. If your driveway is steep, narrow, or has overhead obstructions, note that in your order to reduce surprises, and consider arranging a small staging pad for the pile to avoid extra handling charges.