Gravel in Palmdale, FL

Prices vary by material and supplier, but in West Florida expect common crushed gravel to run roughly $30 to $60 per ton. Delivery can add $0 to $200 depending on distance and truck size; Hello Gravel has a 3-ton minimum. For an exact price, enter your zip code on our site or request a quote so we can show local supplier rates and delivery fees.

Gravel in Palmdale follows West Florida pricing trends and may be slightly higher than urban centers because of fewer nearby quarries. Expect regional variation in color, texture, and price; use Hello Gravel to compare local supplier quotes for the most accurate cost.

A typical tri-axle dump truck carries about 10 to 14 cubic yards (roughly 14 to 20 tons depending on the material). That amount will cover roughly 1,200 to 2,000 sq ft at a 2-inch depth; deeper spreads reduce the area covered. Contact us with the truck size and desired depth so we can give a more precise estimate for your Palmdale delivery.

Generally no — 2 inches is too thin for a driveway that will see regular vehicle traffic. For a stable driveway in Palmdale you should plan on a compacted base of 3 to 4 inches of crushed stone plus 1 to 2 inches of top gravel (about 4 to 6 inches total). Site conditions like soil, drainage, and vehicle weight can change that recommendation, so get a quick consult if you are unsure.

As a rule of thumb, 1 ton of gravel covers about 100 to 120 sq ft at 2 inches depth, 65 to 80 sq ft at 3 inches, and roughly 50 to 60 sq ft at 4 inches. These are estimates because particle size, compaction, and local material density affect coverage. Use our material calculator or contact Hello Gravel for a precise amount for your Palmdale project.

The most cost-effective approach is to order locally sourced material to reduce hauling charges, buy in bulk to meet or exceed the 3-ton minimum, and compare quotes from nearby suppliers on Hello Gravel. If you have access to a truck, pickup can cut delivery fees; scheduling during off-peak times can also lower costs. Always weigh price against material suitability for your project.

Cost depends on width and depth. For a 20 ft long by 10 ft wide single-car driveway (200 sq ft) at a 3-inch compacted depth you will need about 2.5 to 3 tons — so plan on the 3-ton minimum. At $30 to $60 per ton plus delivery, expect a rough total in the $100 to $300 range; request a local quote for an exact price and delivery options in Palmdale.