Gravel in Orlando, FL

Local prices vary by material, supplier, and season. Typical ballpark ranges in the Orlando area are: crushed stone $25-$45 per ton (about $35-$65 per cubic yard), pea gravel $30-$60 per ton (about $42-$84 per cubic yard), and crushed shell $25-$50 per ton (about $35-$70 per cubic yard). Request a live quote on Hello Gravel for exact pricing in your zip code.

Hello Gravel connects you with trusted local suppliers and quarries that deliver in the Orlando area. Our minimum order is 3 tons; many deliveries are free in close-in areas, but typical delivery fees range from $0 to $150 depending on distance, access, and truck type — smaller trucks or tight sites often cost more. Contact us for supplier options and an exact delivery estimate for your address.

For Orlando's sandy soils and frequent rain, angular crushed stone (3/4u0022 minus or similar) with some fines performs best because it compacts and resists migration. Crushed shell and oyster shell blends are common in Florida and look attractive, but they can shift and may need stronger edging and stabilization for driveways. Pea gravel or smooth round aggregate is better for low-traffic paths and drainage areas, not heavy-use driveways.

A typical residential gravel driveway in Orlando is built with a compacted base of 4-6 inches (aggregate base) plus a 2-3 inch wearing course of gravel. If your soil is very soft or poorly drained, increase the base to 6-8 inches. Geotextile fabric is recommended in many Central Florida installations to separate the native sand from the aggregate, slow mixing, and improve stability and drainage.

Rules vary by location and HOA. The City of Orlando and some neighborhoods have zoning or design standards that restrict driveway surfacing, front-yard materials, or visible shell/gravel; many HOAs prohibit loose gravel in front yards. Always check your city zoning office and HOA covenants before ordering materials.

Expect regular maintenance: regrade and compact low spots after heavy rains, remove vegetation, and refresh the wearing surface. For moderate traffic, plan a light top-up (1/2 to 1 inch) annually and a larger refresh (1-3 inches) every 2-5 years; busy driveways may need more frequent attention. Proper edging and drainage reduce how often you need to add material.

Gravel is usually the lowest upfront cost: an installed 2-car gravel driveway in Orlando often ranges roughly $1,500-$4,000 depending on prep and material choice. Asphalt normally runs mid-range, commonly $4,000-$8,000 installed. Pavers are the most expensive option, typically $8,000-$20,000 depending on pattern and base work. These are typical ranges; site prep, permits, and drainage needs can move estimates significantly.

Yes — colored gravels, red or blue decorative stones, and crushed shells (coquina, oyster shell) are commonly available locally. Colors can dull over time from traffic, fines, and weather; good edging, a proper base, and occasional top-ups help preserve appearance. For high-visibility areas consider stabilizers or resin-treated aggregates to reduce movement and color loss, and ask suppliers about UV- and weather-resistant options.

Dump trucks usually deliver from the street to the driveway or curb; tight access, low overhead wires, soft lawns, or narrow gates may require smaller trucks or additional labor and fees. Note access issues in Order Notes at checkout so suppliers can plan the right truck and avoid unexpected charges. Drivers may perform limited tailgate spreading at their discretion, but this is not guaranteed.

A quick method: multiply the area in square feet by the desired depth in inches, then divide by 324 to get cubic yards (Area(ft2) x Depth(in) / 324 = cubic yards). As a rule of thumb 1 cubic yard of gravel weighs about 1.3-1.5 tons depending on material, so multiply cubic yards by ~1.4 to estimate tons. Use Hello Gravel's material calculator or contact our team for a precise estimate and to account for compaction and regional material density.