Gravel in New Port Richey, FL

Costs vary by material, truck size, and supplier, but a typical tri-axle dump truck load in the New Port Richey area usually runs between about $300 and $1,200. Finer decorative gravels will be at the higher end and bulk base gravel at the lower end. Get an exact price for your zip code and preferred material through our quote tool.

It depends on depth: at 2 inches you’ll need about 8–9 tons (roughly 6–7 cubic yards), and at 3 inches about 12–13 tons (about 9–10 cubic yards). Local soil and compaction affect the final amount, so use Hello Gravel’s material calculator or request a quote to be sure.

Coverage depends on depth and material density. As a rule of thumb in New Port Richey: one ton covers roughly 100–120 sq ft at 2 inches, and about 60–80 sq ft at 3 inches. For precise planning, enter your dimensions into our calculator since local materials and compaction change the numbers.

One cubic yard equals 27 cubic feet and will cover about 324 sq ft at 1 inch depth. In New Port Richey materials, a cubic yard of gravel typically weighs around 1.2–1.5 short tons depending on stone type and moisture. Prices vary by material and location, so request a local quote for exact cost.

A full tri-axle load often contains roughly 10–14 tons, which will cover approximately 1,200–1,700 sq ft at a 2-inch depth or about 800–1,200 sq ft at a 3-inch depth. Exact coverage depends on the truck’s load weight, the specific gravel type, and compaction. Ask us for a delivery estimate based on your driveway size and desired depth.

Costs depend on length and depth. As an example, a 20-foot-wide by 50-foot-long driveway (1,000 sq ft) at 3 inches depth typically requires about 12–13 tons; material and delivery together can range widely but often fall between $300 and $1,000 depending on material choice. For an accurate price for your exact driveway, request a quote with your zip code and preferred material.

For footpaths and light-use areas, 2 inches can be OK, but for a driveway carrying vehicles we recommend a thicker profile. Typically install 4–6 inches total: a compacted base layer (often 2–4 inches of crushed stone) plus 2–3 inches of top gravel. Local heavy rains and sandy subsoils in the New Port Richey area mean proper base and drainage are especially important for lasting performance.

Buy in bulk, choose a basic crusher-run or road base instead of decorative mixes, and schedule delivery to avoid multiple small loads. Ordering through a marketplace like Hello Gravel connects you with local suppliers and negotiated rates, which often saves money compared with retail pickup. Also compare materials—recycled crushed concrete can be a cost-effective option where allowed.

A 20x20 driveway is 400 sq ft. At 3 inches depth you’ll need about 4.5–5 tons (roughly 3.5–4 cubic yards); depending on material and delivery that usually costs from about $150 to $500 in the New Port Richey area. Get a firm quote through our site since prices vary by material and availability.

Use depth to calculate coverage: 10 cubic yards will cover about 3,240 sq ft at 1 inch, 1,620 sq ft at 2 inches, 1,080 sq ft at 3 inches, and 810 sq ft at 4 inches. Regional variations in stone size and compaction change these figures slightly, so treat these as planning estimates and confirm with our calculator.

Capacity depends on the trailer sidewall height and load limits, but a 7x14 trailer typically holds roughly 3 to 6 cubic yards of loose material. Lower sidewalls and legal weight limits reduce that number, while filling higher increases volume but may exceed safe or legal weights. If you’re using a contractor or renting a trailer, confirm the safe payload for your local roads.

With proper base, drainage, and occasional maintenance (raking and top-ups), a gravel driveway in New Port Richey can perform well for many years—often a decade or more before larger reworks are needed. Heavy rainfall, storm runoff, and vehicle traffic will speed wear; plan on adding a light topping every 2–5 years to maintain appearance and surface levels. Good drainage and periodic grading are the most important maintenance tasks in our rainy subtropical climate.

If you mean covering the footprint (1,000 sq ft), depth matters: at 2 inches you’ll need about 8–9 tons (6–7 cubic yards), and at 3 inches about 12–13 tons (9–10 cubic yards). For foundations, walkways, or driveways you may need a thicker compacted base; consult our material calculator or sales team for a recommendation tailored to your project.

One cubic yard is about 27 cubic feet; a common wheelbarrow holds roughly 3 cubic feet. That means expect about 9 wheelbarrow loads per cubic yard for a typical wheelbarrow, though smaller or larger wheelbarrows change the count to about 8–12 loads. For larger projects it’s usually faster and cheaper to have delivery.

Yes—small projects like garden paths or small patios are DIY-friendly with basic tools, proper weed barrier, edge restraint, and compaction. For driveways or areas with vehicle traffic we recommend hiring a pro for proper subgrade preparation and compaction to avoid drainage and settling problems common in Florida. You can request tailgate spreading through the checkout, but the driver will decide if that service is safe and possible.