Gravel in Melbourne, FL

Total cost depends on the gravel type, quantity, and supplier. A single dump truck load includes the truck haul plus material, so price = material price per ton times the tons carried plus delivery; use Hello Gravel to get an exact quote for your zip code. Note our minimum order is 3 tons and delivery is typically via tri-axle dump trucks with 2+ business day lead time. For a firm price, get a quote through our site or call our team.

Coverage depends on depth. As a rule of thumb, 1 ton of typical gravel covers about 80-100 sq ft at 1 inch depth, about 40-50 sq ft at 2 inches, and about 25-35 sq ft at 3 inches. For Melbourne projects use these numbers to estimate and round up for compaction and waste.

Quantity depends on desired depth: for 2 inches you need about 6.2 cubic yards (roughly 8-9 tons), for 3 inches about 9.3 cubic yards (about 12-13 tons), and for 4 inches about 12.3 cubic yards (about 16-17 tons). In Melbourne's humid, rainy climate, 3-4 inches is common for paths and 4-6 inches for vehicle driveways to avoid washout. Contact Hello Gravel for an exact quote and delivery options — remember our 3-ton minimum.

One cubic yard of gravel typically weighs about 1.2 to 1.5 tons depending on material and moisture. For planning, use 1 cubic yard ≈ 1.3 tons as a practical rule. If you need precise weight for hauling limits, ask your Hello Gravel quote team and we can confirm by material type.

For a 20 ft by 10 ft driveway at a 4 inch depth you need about 2.5 cubic yards of material, which is roughly 3 to 3.5 tons. Driveways typically require 4-6 inches of compacted gravel for vehicle traffic, plus a compacted base layer if the soil is soft. Because Hello Gravel has a 3-ton minimum, that size often meets the minimum for delivery — request a quote and delivery window online.

Generally no — 2 inches is usually too thin for a vehicle driveway and will quickly migrate or rut in Melbourne's heavy rains. For driveways we recommend 4-6 inches of compacted material over a prepared base, with good edge restraint to keep gravel in place. Two inches can be acceptable for footpaths or temporary surfaces only.

Tonnage depends on the driveway width and depth. For example, a 100 ft long by 10 ft wide driveway at 4 inches needs about 12.3 cubic yards, which is roughly 16 tons using 1.3 tons per cubic yard. Increase depth to 6 inches or width to 12 ft and plan for substantially more material; use Hello Gravel's calculator or contact us with your exact dimensions for a quote.

The volume depends on how high you load it and the trailer's weight rating. A 7x14 bed filled 2 feet high is about 7.26 cubic yards (7.26 x 1.3 ≈ 9.4 tons), but most 7x14 trailers have axle weight limits that make carrying that much gravel unsafe. Always check your trailer's GVWR (gross vehicle weight rating) and local road rules — for gravel, payload limits often reduce usable volume to 3-6 cubic yards safely.

A well-installed gravel surface can last many years but needs periodic maintenance; expect 10-20+ years with occasional top-ups and regrading. Melbourne's storms and high rainfall can move or thin gravel faster, so plan to refresh or add material every 3-7 years depending on use and drainage. Proper installation with compaction and edge restraint extends life and reduces maintenance.

Buying in bulk by the ton or cubic yard is almost always cheaper than buying bagged gravel. Shop local material types and ask for delivery fees included; Hello Gravel connects you with local suppliers so you can compare material prices and delivery quickly. Also consider reclaimed materials like crushed concrete if appropriate for your project and allowed in your area.

A 20 ft by 20 ft area at 4 inches deep requires about 4.94 cubic yards of gravel, which is roughly 6.4 to 6.5 tons using 1.3 tons per cubic yard. For heavier use consider 6 inches depth, which would need about 7.4 cubic yards (about 9.5 tons). Because of our 3-ton minimum, this size is typically eligible for standard delivery — get an exact quote for material type and cost from Hello Gravel.

At 2 inches deep a 10x10 area needs about 0.62 cubic yards (roughly 0.8 tons). At 3 inches it's about 0.93 cubic yards (around 1.2 tons), and at 4 inches about 1.23 cubic yards (about 1.6 tons). Small quantities fall below our 3-ton minimum, so consider combining with another small area or contacting Hello Gravel for options.

A typical wheelbarrow holds about 3 cubic feet, so one cubic yard (27 cubic feet) is about 9 wheelbarrow loads. If your wheelbarrow is larger (4 cu ft) you would need about 7 loads, and for smaller tubs you may need up to 14 loads. For most Melbourne homeowners moving more than a few cubic yards, delivery by dump truck is faster and safer.

Yes — homeowners commonly install gravel for paths, patios, and small driveways if they are comfortable with site prep, grading, and compaction. Key steps are measuring and ordering the right quantity, removing vegetation, establishing good drainage, compacting a base, adding gravel in lifts, and compacting between layers. For larger or load-bearing driveways consider hiring a pro, and you can request tailgate spreading at checkout but the driver will assess if it is safe to perform.