Gravel in Jensen Beach, FL

Prices vary by material type, volume, and supplier. For common bulk gravel in the West Florida area around Jensen Beach, expect rough delivered ranges of about $40 to $90 per ton (about $56 to $126 per cubic yard) for basic crushed aggregate; decorative or specialty stones can cost more. For an exact, up-to-date delivered price for your address and material choice, get a quote or check your zip code on our site.

One cubic yard equals 27 cubic feet and will cover roughly 324 sq ft at 1 inch, 162 sq ft at 2 inches, 108 sq ft at 3 inches, and 81 sq ft at 4 inches. Gravel weight varies by type, but a good rule is about 1 cubic yard = 1.3 to 1.5 tons; using 1.4 tons/yd3, 1 ton covers roughly 231 sq ft at 1 inch, 116 sq ft at 2 inches, 77 sq ft at 3 inches, and 58 sq ft at 4 inches.

No, 2 inches is usually not enough for a driveway in Jensen Beach. Because of sandy native soils, rainy seasons, and vehicle loads, we recommend a compacted base of 4 to 6 inches of crushed stone (base) plus a 2 to 3 inch wearing layer for a durable surface, or at minimum 3 to 4 inches of well-compacted material for light-use driveways. Proper base preparation and compaction are more important than surface depth alone.

Site prep typically includes clearing vegetation, excavating to the required depth, installing geotextile fabric to separate gravel from native sand, adding and compacting a crushed-stone base in layers, and grading for drainage. Local contractors routinely provide full site prep and will size, compact, and finish the base; Hello Gravel coordinates material delivery, and many customers hire local crews for prep and spreading. Ask at checkout if you want the driver to attempt tailgate spreading, but remember it is at the driver's discretion and not guaranteed.

A typical tri-axle dump truck commonly used for aggregate delivery carries about 8 to 14 cubic yards, which for gravel usually translates to roughly 10 to 20 tons depending on the stone density and truck. Delivery costs depend on material, distance from the supplier, and load size; added fees may apply for next-day delivery or difficult drop locations. For an exact truckload price for Jensen Beach, request a quote with your zip code and desired material.

A standard half-ton pickup usually cannot safely carry a full cubic yard of gravel because 1 cubic yard can weigh about 1.3 to 1.5 tons, often exceeding pickup payload limits. Small projects in Jensen Beach can be handled by yard pickup, renting a trailer, using a contractor with a small dump truck, or ordering a small load delivery if available; check with the supplier or Hello Gravel for specific small-load options. Remember our platform minimum order is 3 tons for standard bulk delivery, so confirm alternate pickup choices if you need less.

Calculate cubic yards with this rule: cubic yards = (square feet x depth inches) / 324. For a 20x20 pad (400 sq ft) at 2 inches you need about 2.5 yd3 (roughly 3.5 tons); at 3 inches you need about 3.7 yd3 (roughly 5.2 tons). Using local delivered price ranges of $40 to $90 per ton, a 20x20 pad at 2 inches would roughly cost $140 to $470 for material and delivery; get a precise quote for exact material choice, compaction needs, and any additional services.

Gravel mixes that include crushed stone with fines — often called crusher run, dense grade aggregate (DGA), or Type 4 in some areas — compact tightly and form a firm surface when installed and mechanically compacted. For a finished surface that behaves like hardpack, use a compacted base of crusher run or DGA and a wearing layer of 3/4u0022 crushed stone, then compact in 2- to 3-inch lifts. In Jensen Beach, combining good base material with geotextile fabric and proper drainage gives the most durable results.

If you meet the minimum order, bulk truck delivery is almost always the most cost-effective per ton for projects that need multiple tons. For very small amounts under the 3-ton minimum, consider yard pickup, renting a dump or trailer, or buying bagged stone from a local supplier or home center. Compare per-ton costs and delivery fees in your zip code to decide which option saves money overall.

Yes, Jensen Beach's coastal environment and sandy soils influence material choice and construction approach. Use a well-graded crushed base, geotextile fabric to limit mixing with native sand, and ensure positive drainage to avoid washout; for heavy loads or poor subsoils, contractors may recommend stabilization additives or mechanical stabilization (cement or polymer binders). Consult a local contractor for engineered solutions for parking pads or heavy-traffic driveways.