Gravel in Sierra Vista Southeast, AZ

Local bulk gravel prices in the Sierra Vista Southeast area typically vary by type and size. Expect a rough range of $25 to $60 per ton for common gravels and about $30 to $75 per cubic yard, depending on material (pea, crushed, DG), whether it is washed, and seasonal demand. Prices can change with supplier, delivery distance, and truck minimums, so check your zip code on Hello Gravel for current local quotes.

Hello Gravel connects you to local suppliers and haulers that serve Sierra Vista Southeast, so availability varies by zip code. Many local suppliers have a 3-ton minimum (matching Hello Gravel’s minimum), and delivery is typically by tri-axle dump truck; some areas offer free delivery while others charge a distance or small-fee based on load and access. View delivery options at checkout or contact our team to see supplier-specific minimums and any add-on fees.

For year-round performance, use angular crushed stone (such as 3/4u0022 crushed rock or 3/4u0022 minus) for driveways and high-traffic areas because it compacts and resists migration during wind and light storms. Decomposed granite (DG) can look great and harden in dry heat but may erode during heavy monsoon flows unless properly stabilized. For drainage features and French drains use clean, washed gravel (3/4u0022 to 1u0022) with no fines; river rock drains well but shifts in heavy runoff, and pea gravel is fine for walkways and decorative areas but moves more easily.

Installation costs vary with site access and prep, but expect a typical range of $1.50 to $4.00 per square foot for a basic gravel driveway installation including grading and base prep, and $2.00 to $6.00 per square foot for patios with more detailed edge work or compaction. French drain installation (materials and labor) often runs from $25 to $60 per linear foot depending on depth and rock type. Get local contractor quotes because prices depend on excavation, geotextile, drainage needs, and truck access.

For a 20x100 ft driveway (2,000 sq ft): a 3u0022 depth requires about 18.5 cubic yards (roughly 26 tons) and a 4u0022 depth requires about 24.7 cubic yards (roughly 35 tons), using a typical density of about 1.4 tons per cubic yard. Always order an extra 5% to 10% to cover grading, compaction, and waste, and confirm density with the supplier since materials vary regionally.

Permit and HOA rules vary by neighborhood in Sierra Vista Southeast and by Cochise County or city jurisdiction; some HOAs restrict color, stone size, or front-yard bark/rock landscaping. Gravel is often allowed but you should check your HOA covenants and contact Sierra Vista city or Cochise County planning for any driveway or drainage permit requirements before ordering. If in doubt, request documentation or a variance from your HOA and save product photos and spec sheets from your supplier.

Common issues are washouts during monsoon storms, washboarding and ruts from traffic, weed growth, and dust from dry heat. Prevent problems by installing proper drainage (swales and French drains), using geotextile fabric and edge restraints, selecting angular stone that locks, compacting a solid base, and topping up gravel annually; apply weed barrier and pre-emergent herbicide where weeds are an issue. For severe washout areas, consider larger riprap or check dams uphill to slow runoff.

Gravel is the lowest up-front cost and very permeable, which helps during monsoon rains, but it requires periodic regrading and topping, especially after heavy runoff. Asphalt has higher initial cost and can soften or crack in extreme heat without proper base work, while pavers cost the most up front but provide a long-lasting, low-maintenance surface. Choose gravel for budget-friendly, permeable surfaces; choose pavers or well-installed asphalt if you want minimal frequent maintenance and a finished look.