Gravel in Phoenix, AZ

Prices vary by material, supplier, and delivery, but delivered gravel in the Phoenix area commonly runs about $30 to $60 per ton for typical crushed rock or base materials. Premium decorative gravels or specialty colors can cost more, and delivery, minimum order (3 tons), and distance from the quarry will affect the final price. Use our calculator or get a quote for an exact price for your zip code.

A 50 lb bag is about 0.0185 cubic yards and will cover roughly 6 sq ft at 1 inch depth, 3 sq ft at 2 inches, and 2 sq ft at 3 inches. These are approximate values for crushed stone and will vary slightly by material and compaction. For larger jobs, ordering by the yard or ton is usually more economical.

Recycled crushed concrete, crusher run (road base), and general road base blends are often the most affordable options in the Phoenix market because they use locally available material and have fewer processing costs. Availability can vary by region, so prices fluctuate with supplier inventory and haul distance. If you need a finished look, keep in mind decorative gravels and river rock typically cost more.

For a durable driveway, avoid putting gravel directly on loose dirt; we recommend removing loose topsoil, installing a geotextile fabric to separate soil and stone, and placing 4 to 6 inches of compacted road base topped with 2 to 3 inches of finish gravel. In Phoenix’s desert soils, proper compaction and edge restraint help prevent migration and rutting during rain events. Good base prep reduces maintenance and improves load-bearing capacity.

A typical tri-axle dump truck in Phoenix carries about 10 to 12 cubic yards, which is roughly 14 to 17 tons depending on the material. Delivered prices for a 10-yard load commonly fall in the $350 to $900 range in the Phoenix area, varying by material type, distance, and supplier. Hello Gravel has a 3-ton minimum and can provide exact delivered pricing for your address.

Costs depend on the driveway width, depth, site prep, and whether you need grading or drainage work; for example, a 20 ft by 10 ft driveway at 4 inches depth requires about 5 cubic yards of gravel. Material and delivery for that size often run in the low hundreds, while labor and proper base prep can add $500 to $2,000 depending on complexity. For a detailed estimate, provide dimensions and site photos so we can quote materials and suggest local contractor pricing.

No, 2 inches is generally too thin for vehicle traffic; it's fine for a decorative top dressing or walking paths but will quickly scatter under cars. For driveways, we recommend 4 to 6 inches of compacted base rock plus a 2 to 3 inch finish layer depending on traffic and soil. Proper compaction and base prep are more important than the top layer thickness alone.

A 10-yard (10 cubic yard) load equals about 270 cubic feet. That covers approximately 1,620 sq ft at 2 inches depth, 1,080 sq ft at 3 inches, and 810 sq ft at 4 inches. These figures assume even spreading and no compaction loss; heavier compaction or settling will slightly reduce coverage.

Materials with fines like crusher fines, crushed limestone, and certain decomposed granite mixes compact tightly and can produce a firm, stable surface when installed and compacted correctly. These surfaces can become quite hard but won’t reach the structural strength of concrete; they do require periodic maintenance. For Phoenix, choose local products that handle heat and single-storm runoff and ask about binders or stabilizers if you need reduced dust and migration.

Gravel has a lower initial cost and is quicker to install, making it more budget-friendly up front, while concrete is more expensive to install but requires less frequent maintenance over time. In Phoenix, gravel can be economical for large areas or driveways but expect periodic regrading, topping, and dust control. Consider your budget, desired look, and how much maintenance you want when choosing between the two.

A 7x14 dump trailer typically holds about 5 to 7 cubic yards of gravel, depending on the sidewall height and whether material is heaped. In weight terms that is roughly 7 to 10 tons for common crushed stone, but exact tonnage depends on the aggregate density. If you plan to use a trailer, confirm its load rating and local road limits before hauling.

A delivered 10-yard load in the Phoenix area commonly costs between $350 and $900, depending on material type (base rock vs decorative), supplier, and delivery distance. Ten cubic yards is about 14 tons, so if you need a ton-based quote we can convert and give an exact price for your zip code. Use our online checkout or contact our team for a firm delivered price and available delivery dates.