Fill Dirt in Harrisburg, NC

Delivered fill dirt prices in Harrisburg typically vary by quantity, distance, and local supplier availability. Expect a broad range of roughly $10 to $30 per ton delivered in the West North Carolina area; larger contractor loads will be toward the lower end. Hello Gravel offers transparent, regional pricing in checkout—check your zip code or request a quote for an exact delivered price. Minimum orders Start at 3 tons.

For raising grade or non-structural backfill, clean, compactible fill dirt (low organic content) is preferred to avoid long-term settling. For driveway bases and structural backfill you usually need engineered material—crushed stone or road base—rather than plain fill dirt; check project specs or your inspector. Add a geotextile or 4-6 inch compacted lifts when placing fill dirt over clay soils common in Cabarrus County.

Use this quick formula: cubic yards = area (sq ft) x depth (in) / 324, then multiply cubic yards by about 1.4 tons per cubic yard for a rule-of-thumb tonnage. Examples: 1,000 sq ft raised 3" = about 9.3 yd3 or ~13 tons; 5,000 sq ft at 3" = about 46.3 yd3 or ~65 tons; 10,000 sq ft at 12" = about 462.9 yd3 or ~648 tons. These estimates vary with moisture and compaction, so order a little extra for settlement and grading waste.

Hot, humid summers and intense rain events in the Harrisburg area accelerate consolidation, erosion, and runoff if fill dirt is not compacted and protected. Wetting from heavy rain can cause added settlement and washouts on unprotected slopes, while drying can lead to cracking and surface erosion. Stabilize newly placed fill with proper compaction, temporary erosion controls, seed or straw, and positive drainage to reduce these risks.

Hello Gravel supports both DIY homeowners and contractors in the Harrisburg area. Minimum orders Start at 3 tons, and the platform connects you with local suppliers that can offer small-load delivery; contractors can request larger bulk pricing and scheduled deliveries. Check your zip code on Hello Gravel or contact our sales team for volume discounts and delivery scheduling.

Place fill dirt in thin lifts (4 to 6 inches loose) and mechanically compact each lift with a plate compactor or roller to reduce later settlement. Condition moisture to near-optimal level before compaction—too wet or too dry reduces compaction effectiveness—and consider geotextile fabric or a crushed rock layer between clay and fill to improve drainage. For structural work or foundations, follow inspector requirements and consider a compaction test (proctor) or hire a geotechnical contractor.

Fill dirt is meant for raising grade and filling voids and is not a reliable structural base for driveways or septic fields because it compacts and can retain water. Crushed stone and road base provide load-bearing strength and drainage needed under driveways and septic areas, so they are usually required by inspectors. Use fill dirt only for non-structural backfill or as a leveling layer beneath an engineered base system.

Permit requirements vary by project type and scope; small landscaping fills usually do not need a permit, but foundation backfill, significant regrading, or changes to stormwater flow often trigger county or town review. Cabarrus County and the Town of Harrisburg building or planning office can confirm rules for foundation backfill, compaction testing, and sediment control. Always check local permitting before large deliveries or work that affects drainage or neighboring properties.

Newly installed fill dirt commonly settles over months to a few years, so expect some follow-up maintenance like adding 1 to 3 inches of material or regrading in the first 6 to 18 months. In Harrisburg's climate, heavy rains can produce erosion, so stabilizing with seed, sod, or mulch and repairing washouts after storms reduces recurring maintenance. For driveway areas, use a proper base material and limit reliance on fill dirt to avoid frequent repairs.

Deliveries are typically made by tri-axle dump truck, so plan for good access: a firm pull-in area, 12-16 ft width, and about 13 to 14 ft of vertical clearance. Driveway weight limits, soft ground, low-hanging wires, narrow neighborhoods, or HOA rules about delivery times and truck parking can restrict options—note these in your order and contact Hello Gravel if you have tight access. Drivers may offer tailgate spreading at their discretion, but this is not guaranteed.

Fill dirt itself does not 'expire,' but installations can change over time due to settlement, erosion, and vegetation growth, especially in Harrisburg's variable weather. If properly compacted and stabilized, graded areas can remain stable for many years, but expect periodic touch-ups after major rains or over several growing seasons. For load-bearing uses, choose engineered base materials to ensure long-term performance.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.