Fill Dirt in Sandy, UT

Fill-dirt is subsoil or native soil used to raise grade, fill holes, and build up low spots; it is not topsoil and is not intended for planting without amendment. In Sandy you would use fill-dirt for grading, raising a yard or pad, backfilling around foundations, and preparing sites before adding topsoil or structural base material.

Use this: cubic yards = (square feet x depth in inches) / 324. For 1,000 sq ft at 4 inches you need about 12.35 cubic yards, which is roughly 15 to 20 tons of fill-dirt depending on moisture and compaction. Always add 5-10% extra for settlement and compaction, and use our online calculator or contact our team for a site-specific estimate.

Delivered prices vary by supplier, haul distance, and how much you order, but expect roughly $12 to $30 per ton for basic fill-dirt in the Sandy/Salt Lake City area. Larger orders tend to get the lower end of that range; local availability, truck access, and any spreading or special handling will increase cost. Hello Gravel requires a 3-ton minimum and shows local pricing and delivery options during checkout.

A 10-yard loose load typically equals about 12 to 16 tons, so at $12 to $30 per ton a delivered 10-yard load will commonly run between about $144 and $480. That range depends on exact weight, supplier pricing, delivery distance, and any extra services like spreading or difficult access. Use our quote tool for a site-specific price and remember the 3-ton minimum.

Common trucks are smaller tandem-axle dumps (6-8 cubic yards), tri-axle dumps (10-14 cubic yards) and larger end-dumps or belly-dumps for big jobs (15-20+ cubic yards). Hello Gravel works with local haulers and typically uses tri-axle trucks for residential deliveries in Sandy; if you need a specific truck size, note it in Order Notes and our team will try to match your request.

You should not rely on loose fill-dirt alone for a driveway surface; fill-dirt must be placed in lifts and mechanically compacted, and most driveways benefit from a properly compacted granular base (road base or crushed stone) on top. In Sandy's freeze-thaw climate and variable soils, professional compaction and proper drainage are important to avoid settling and frost heave—ask our team about local compaction contractors if you need installation services.

Some haulers in Sandy will offer tailgate spreading, but it is performed at the driver's discretion and subject to site conditions; request spreading at checkout and note that Hello Gravel cannot guarantee spreading. Typical additional fees for spreading can range widely (often about $50 to $200+ depending on size and difficulty), and standard delivery lead time is 2+ business days with next-day options available for orders placed before noon CST for an extra fee.

Yes—Utah soils around Sandy tend to be moderately to strongly alkaline due to the arid climate and regional geology, so plain fill-dirt is not suitable as finished planting soil. If you plan to install planting beds, order screened topsoil or topsoil blended with compost and any necessary pH amendments; for vegetable gardens or sensitive plants, consider a soil test and amend accordingly before planting.

Costs depend on the driveway size and required base depth; as an example, a 20 ft by 50 ft driveway (1,000 sq ft) with a 6-inch base needs about 18.5 cubic yards of material (roughly 22 to 30 tons). Material-only costs for fill-dirt and a compacted base layer in Sandy could range from a few hundred dollars up to about $1,000 plus delivery, but you should also budget for compaction, proper granular base (crushed rock) and top gravel—total installed costs commonly run from roughly $1,000 to $3,500 depending on site prep and materials. Because fill-dirt is not an ideal finished base, we recommend a site visit and a quote that separates material, delivery, compaction, and surface gravel costs.

Fill-dirt is not recommended where you need a finished planting surface, for walkways or driveways without a structural base, or in areas where settling would cause drainage or utility issues. Avoid using untreated fill-dirt under lawns or gardens without topsoil and amendments, and don't use loose fill on slopes without erosion control and compaction—if in doubt, contact our team for guidance on the right material for your project.