Fill Dirt in Draper, UT

Fill-dirt is generally clean soil used to raise grades, fill low spots, and support landscaping or foundation backfill. In Draper, fill-dirt is commonly used to build up yard elevations, level lots before landscaping, or to fill trenches; it is not usually the finished surface for driveways or pads without a structural base on top.

To raise 1,000 square feet by 6 inches you need about 18.5 cubic yards of material, which converts to roughly 20 to 25 tons of fill-dirt depending on moisture and compaction. We recommend ordering a bit extra (5-10%) to account for settling and compaction during placement.

Typical delivered prices for basic fill-dirt in the Draper area usually fall in the range of about $8 to $18 per ton, depending on supplier, haul distance, and material quality. Final pricing can vary by season and by minimum order (Hello Gravel minimum is 3 tons), so request a local quote for an exact cost.

Many local suppliers and haulers deliver fill-dirt to Draper and some offer optional tailgate spreading at the driver's discretion; Hello Gravel lets you request this at checkout but spreading is not guaranteed. Compaction is a separate service often provided by landscaping or grading contractors rather than standard delivery drivers, so plan to hire a contractor or rent compaction equipment if you need professional compaction.

Fill-dirt can be used to raise and grade a site, but for a stable building pad or driveway in Draper’s clay and freeze-thaw soils you should use engineered structural fill and a compacted base (crushed rock or road base) on top. For any structural or building foundation work we recommend a geotechnical review or following local building codes to specify the right fill and compaction procedures.

Fill-dirt will compact to an extent, but its stability depends on particle size, moisture, and compaction effort; it is best used as bulk fill or to raise grades. For a stable surface like a driveway or patio, crusher fines or well-graded road base compacted in lifts is usually a better choice in West Utah’s freeze-thaw climate.

Yes—Draper may require permits for substantial grading, changes to drainage, retaining walls, or work that affects setbacks and stormwater runoff. Small landscape fills often do not need a permit, but you should check with Draper City building and planning departments before starting larger grading or fill projects to avoid code issues.

Fill-dirt used as a driveway surface without a compacted structural base will typically show ruts, erosion, and settlement within one to a few seasons under vehicle traffic. Proper installation with compaction and a crushed-stone wearing surface can last many years; without that, expect more frequent touch-ups.

Because freeze-thaw cycles and poor drainage can cause heaving and settlement, you should address drainage when using fill-dirt in Draper. Adding geotextile fabric for separation, installing subdrains where water collects, and placing a well-draining base layer under traffic areas are common practices to improve long-term performance.

Picking up fill-dirt from a supplier yard can save you on delivery fees and may lower the per-ton cost, but you must provide suitable vehicles and labor to load and haul. Delivered loads are more convenient and often priced per ton including haul; savings for pickup vary but are often modest for small orders once you factor in time, equipment, and multiple trips.

Hello Gravel connects you with local suppliers and haulers in the Draper area, and many local landscaping and grading contractors offer installation, spreading, and compaction services. If you need help finding contractors with experience on Draper soils, contact our team for vendor recommendations and quotes tailored to your address.