Gravel in Temple City, CA

Delivered crushed gravel in Temple City commonly ranges from about $45 to $85 per ton depending on material and supplier. Using a rough conversion of 1 cubic yard ≈ 1.3 tons, that works out to about $60 to $110 per cubic yard. Prices vary with material type, delivery distance, minimum-order rules, and current market conditions, so check your zip code on Hello Gravel for an exact quote.

Local suppliers in the Temple City area typically offer 3/4u0022 crushed stone, decomposed granite (DG), pea gravel, river rock, crusher fines, and base rock. 3/4u0022 crushed is good for driveways and drainage layers, DG and crusher fines are popular for patios and pathways, pea gravel is decorative and good for play areas, and river rock is mainly decorative or for dry creek beds. Choose by application: structural work needs angular crushed rock, while walking surfaces often prefer smoother DG or pea gravel.

Hot, dry summers and occasional heavy winter storms mean you should pick materials and details for both dust control and stormwater handling. Lighter-colored gravels reflect heat better; angular crushed rock drains well after rain, while DG can harden and shed water. Plan for periodic topping and weed control since dry conditions promote dust and seeds, and ensure edges and slopes direct runoff to drainage points.

Permits and HOA rules vary. Temple City and Los Angeles County can have regulations related to impervious surface, driveway locations, and stormwater runoff, and some HOAs restrict front-yard coverings or specify landscape materials. Before you start, check with the City of Temple City Planning Division and your HOA guidelines; Hello Gravel can help when you request an order by flagging questions about curb cuts or unusual deliveries.

Hello Gravel works with local suppliers and contracted haulers that serve Temple City using tri-axle dump trucks. The platform-wide minimum order is 3 tons, though some local suppliers may set different minimums, and many areas offer free delivery while others charge a fee based on distance and access. Delivery fees for short local runs are often $0 to $150; request a quote on Hello Gravel to see exact minimums and fees for your address.

Calculate area (length x width) and multiply by depth to get cubic feet, then divide by 27 to get cubic yards. To convert to tons, multiply cubic yards by about 1.3 (typical for gravel). Example: a 20 ft x 10 ft driveway at 3 inches deep = 600 sq ft x 0.25 ft = 150 cu ft ÷ 27 = 5.6 cu yd ≈ 7.3 tons; round up and add 5-10% for compaction and waste.

For drainage, use angular crushed rock like 3/4u0022 crushed stone or clean base rock as a sublayer; these materials let water pass through and resist settling. Combine that with geotextile fabric to limit weed growth and use a top layer of crushed rock or DG; for extra control, install edging and a weed barrier and plan for periodic weed treatment. Avoid loose round pebbles as the primary drainage layer since they can shift more easily.

A well-installed gravel driveway or path can last many years, but surfaces commonly need attention: top-up every 2 to 5 years, regrading after heavy rain events, and annual raking to redistribute material. Expect to add fresh material more often on driveways with vehicle traffic and to address weeds seasonally. Regular maintenance like compaction after installation and edge care will extend the useful life.

Gravel is generally the most affordable upfront and provides excellent drainage but requires more maintenance and can shift under heavy use. Concrete is the most expensive initially, creates an impervious surface that holds heat and increases runoff, and needs less frequent topping or regrading. DG offers a middle ground: moderate cost, good compaction for walking and light vehicle use, less runoff than concrete, and generally lower heat retention than solid concrete.

Common add-ons include base rock or road base for subgrade, geotextile fabric, edging materials, compaction services, stabilizer binders, and optional tailgate spreading. Approximate price ranges are: base rock or road base $30 to $70 per ton, geotextile fabric $0.60 to $2.00 per sq ft, edging $3 to $8 per linear ft, and site compaction or spreading labor often $100 to $400 depending on scope. Availability and exact pricing vary by supplier and job access, so request an itemized quote through Hello Gravel.