Gravel in San Ardo, CA

A typical tri-axle dump truck in our network carries about 10 to 12 tons of gravel. In San Ardo, delivered price depends on material and haul distance but generally runs between about $40 and $90 per ton, so a full truckload often costs roughly $400 to $1,080; small local hauls tend toward the lower end. Remember Hello Gravel has a 3-ton minimum and delivery timing and fees vary by supplier.

One ton of gravel is a weight measure, and coverage depends on depth and material density. In San Ardo, one ton of typical crushed gravel will cover about 80 to 160 square feet at 2 inches depth (about 1.4 to 1.6 tons per cubic yard is common). For planning, use 1.5 tons per cubic yard as a middle estimate.

Ordering bulk delivery (rather than bags) and choosing locally sourced standard mixes like bank-run or crushed concrete usually gives the lowest per-ton price. Picking up material yourself from a nearby supplier saves delivery fees, but Hello Gravel’s platform often negotiates free or low-cost delivery—check your zip code and compare. Keep in mind closer sources typically cost less because hauling in remote deliveries adds to price.

Prices vary by local supply, but natural rounded gravel (river rock) is often similar or slightly cheaper in areas with local deposits, while crushed stone can cost more because it requires processing. Crushed stone generally performs better for driveways and compaction, so factor longevity and performance into your cost comparison. In San Ardo, regional geology determines which is more available and affordable.

Costs depend on width and depth; for example, a 20 ft long by 10 ft wide driveway at 3 inches depth needs about 1.9 cubic yards, roughly 3 tons. With local per-ton prices of about $40 to $90, material cost is roughly $120 to $270 plus any delivery fee, and Hello Gravel’s minimum 3-ton rule typically applies. Use our material calculator or contact our team to get an exact quote for your dimensions and preferred gravel type.

Two inches is usually too thin for a long-term driveway; it may work temporarily for a light-use path or overlay on a very stable base. For residential driveways in San Ardo, we recommend 3 inches for light passenger cars and 4 to 6 inches for regular truck use or areas without a compacted base. Proper compaction and a firm base layer are as important as overall depth, especially during the rainy season.

You need to know the width and desired depth. As an example: a 100 ft long by 12 ft wide driveway at 3 inches depth is about 11.1 cubic yards, which converts to roughly 16 to 17 tons using 1.4–1.6 tons per cubic yard. Adjust up for extra to account for compaction and grading waste, and remember Hello Gravel’s minimum order is 3 tons.

A common and versatile choice is 3/4-inch crushed stone for the base with a 3/8-inch or “crusher fines” top layer to lock in a smooth driving surface. Larger angular stone compacts well and provides drainage, while smaller fines on top reduce movement and dust. Availability can vary around San Ardo, so check local supplier options and consider a layered approach for best results.

Bank-run gravel, crusher run, or recycled crushed concrete are typically the most economical options because they are minimally processed and often sourced locally. They provide a good base but can be dustier or less decorative than clean decorative rock. Ask suppliers about local mixes—Hello Gravel can show local choices and pricing for your zip code.

Materials known as crusher fines or decomposed granite (DG) contain small particles and fines that compact tightly and form a firm surface that feels much firmer than loose gravel. Stabilized gravels with polymer additives or binders also create a very hard, almost pavement-like surface but usually cost more and may require special installation. Check with suppliers in the San Ardo area for crusher fines and stabilizer options if you want a hardened finish.

One cubic yard equals 27 cubic feet, so coverage depends on your desired depth. Roughly, one cubic yard covers about 162 square feet at 2 inches depth, about 108 square feet at 3 inches, and about 81 square feet at 4 inches. Use these figures to convert your project area into cubic yards, then into tons for ordering.

Measure the length and width of the area and choose a target depth, then multiply length by width by depth (in feet) to get cubic feet, divide by 27 to get cubic yards, and multiply by about 1.5 to convert to tons. Remember Hello Gravel’s 3-ton minimum and regional variations in density and price—use our online material calculator or call 855-241-8884 for help with calculations and quotes. Schedule delivery using the checkout calendar and include order notes for placement details or tailgate spreading requests.