Gravel in Hillsborough, CA

Prices vary by material and supplier, but in the Hillsborough/Bay Area you can expect roughly $60 to $150 per cubic yard for common gravel types. Local factors like material type, delivery distance, and current demand affect price; use Hello Gravel to get an exact quote for your zip code and remember our minimum order is 3 tons.

Coverage depends on depth and gravel density, but a good rule of thumb is 1 ton covers about 80 to 100 square feet at 1 inch depth or about 20 to 30 square feet at 3 inches. In Hillsborough, where materials are regionally sourced, density can vary, so check the specific material weight on your Hello Gravel quote for a precise estimate.

The most economical options are ordering bulk material by the ton from local suppliers (avoiding bagged product) or choosing recycled options like crushed concrete or road base. Compare quotes on Hello Gravel, factor in delivery fees and minimums, and consider pickup from a nearby supplier if you have a vehicle that can haul loads safely.

Costs depend on the per-ton price; using a typical Hillsborough range of $50 to $120 per ton, 500 tons would cost roughly $25,000 to $60,000 before delivery and taxes. For large orders Hello Gravel can help connect you with local suppliers for a firm bulk quote and scheduling options.

Truck capacity varies: a typical tri-axle dump truck used in our network often carries about 10 to 16 cubic yards, roughly 12 to 22 tons depending on material and legal weight limits. Cost per truckload varies with material and delivery distance; in the Bay Area expect a wide range—ask Hello Gravel for a truckload quote based on your address and project needs.

For a 10 ft by 10 ft area (100 ft2), at 2 inches deep you'll need about 0.6 cubic yards (roughly 0.8–1.0 ton), and at 3 inches about 0.9 cubic yards (roughly 1.2–1.4 tons). Because Hello Gravel has a 3-ton minimum, you may want to plan for additional projects or accept a larger delivery to meet minimums.

Cost depends on driveway width, depth, and material. As an example, a 20 ft wide by 20 ft long driveway (400 ft2) at 3 inches depth needs about 3.7 cubic yards (about 5 to 6 tons); at local rates of $60 to $150 per cubic yard that material alone could run roughly $220 to $560, not including delivery, compaction, or edging. Get a tailored quote from Hello Gravel with your exact dimensions and preferred material.

Capacity depends on side height, but a 7x14 trailer typically carries about 4.5 to 7 cubic yards of loose gravel (short sides ~1.5 ft yields ~4.5–5.5 yd3; higher sides yield more). That equates to roughly 6 to 10 tons depending on material density, so confirm your trailer specs and local weight limits before loading.

Gravel surfaces can last many years but require periodic topping up; for low-traffic paths you may go 5 to 15 years before major refresh, while driveways with regular vehicle traffic often need maintenance every 2 to 5 years. Hillsborough's mild climate reduces frost-related movement, but heavy rain events can still cause displacement and rutting, so plan inspections after storms.

Generally no — 2 inches is thin for a driveway and will compact quickly, causing rutting and weed issues. For a stable gravel driveway in Hillsborough, aim for 3 to 4 inches of compacted top material over a 4 to 6 inch crushed rock base for best long-term performance.

Recycled crushed concrete or crusher run (a mix of fines and rock) is often less expensive than quarried decorative gravel and provides good compaction for driveways. Decomposed granite can be a lower-cost, more natural-looking option for pathways, but availability and price vary locally so compare options on Hello Gravel.

A 50 lb bag of gravel is about 0.48 cubic feet and will cover roughly 5 to 6 square feet at 1 inch depth, or about 2 square feet at 3 inches depth. For Hillsborough projects it's usually more economical to order bulk tons rather than many bags once your coverage exceeds a few square feet.

Delivery weight depends on truck size and local weight limits; many local dump trucks deliver between 10 and 22 tons of gravel per load, with tri-axle trucks commonly in the 12 to 18 ton range. Hello Gravel coordinates with local haulers and will confirm expected load size for your order during quoting and scheduling.

Estimate by width and depth: for a 100 ft long by 10 ft wide driveway (1,000 ft2) at 3 inches depth you'll need about 9.3 cubic yards, which is roughly 13 tons using a typical conversion. Add 5 to 10 percent for compaction and waste, and remember Hello Gravel's 3-ton minimum when placing your order.