Gravel in Provo, UT

Prices vary by material and supplier, but in Provo expect common driveway gravels to run roughly $35 to $80 per ton delivered, with decorative river rock often costing more. One cubic yard of gravel is roughly 1.2 to 1.6 tons depending on the material; a good rule of thumb is about 1.3 tons per cubic yard, so divide the per-ton price to estimate per cubic yard. Final cost depends on material type, delivery distance, minimum order (Hello Gravel minimum is 3 tons), and any extra services like spreading.

For Provo driveways, angular crusher-run or 3/4u0022 crushed stone topped with a compactable fines layer performs best because it locks together and compacts well in freeze-thaw conditions. Decomposed granite (stabilized) can be a good low-profile option for flat to gently sloped areas, while pea gravel and smooth river rock are less ideal because they shift and rut under vehicle traffic. Consider regional sourcing and compaction to improve longevity on local soils and slopes.

For a 20x20 driveway (400 sq ft), a 4u0022 compacted depth requires about 5 cubic yards, roughly 6 to 7 tons; increasing to a 6u0022 depth raises it to about 7 to 9 cubic yards or 9 to 12 tons. For a 24x24 driveway (576 sq ft), a 4u0022 depth is about 7 cubic yards (9 to 10 tons) and a 6u0022 depth around 10 to 12 cubic yards (13 to 16 tons). Always confirm target depth for base and wearing layers and get a supplier or Hello Gravel calculator quote for a precise amount.

Local suppliers and haulers commonly deliver to Provo and many offer tailgate spreading, but spreading is performed at the driver's discretion and may require an extra fee. Typical spreading fees vary by job complexity and quantity and commonly fall in the range of about $50 to $150, but steeper or tight-access jobs can cost more. When ordering, request spreading in the checkout notes and confirm availability and fees with the supplier or Hello Gravel customer service.

Freeze-thaw cycles can cause heaving, settlement, and ruts as fines shift and moisture expands, while mountain runoff during spring melt or heavy storms can wash away material and create channels. Good compaction, proper base layers, edge restraint, and consistent drainage (swales, culverts, or retaining edges) are essential to reduce these effects. Expect periodic regrading and topping, especially after heavy runoff seasons.

Regulations vary by neighborhood; many Provo home projects do not require a building permit for replacing a driveway surface, but driveway location, curb cuts, and stormwater rules may be regulated. Homeowners should check Provo City Planning and Engineering departments and review any HOA covenants before starting work. When in doubt, contact the city or your HOA for site-specific requirements to avoid fines or rework.

Gravel has a lower upfront material cost than asphalt or pavers but typically requires more maintenance, including periodic grading, topping, and edge repairs every few years. Asphalt has higher initial cost and a longer service life with less frequent maintenance, while pavers are the most expensive upfront but offer longevity and low spot repair costs. Choose based on budget, desired maintenance level, and local drainage and freeze-thaw conditions.

For slopes and drainage-prone sites in Provo, use a compactable crushed base such as crusher-run or 3/4u0022 minus for a 4u0022 to 6u0022 compacted base, plus a 2u0022 to 3u0022 wearing course of angular stone. Install geotextile fabric under the base to separate poor soils, add edge restraint to keep material contained, and design swales or drainage outlets to handle mountain runoff. For steep slopes, consider stabilized decomposed granite or retaining features to prevent washout.

Yes, existing gravel can often be screened and reused if it's not overly contaminated with fines or debris; screening and grading can restore usable material and reduce waste. Local landscapers, crushing yards, and reclamation services in the Salt Lake City/Provo area offer screening, crushing, and regraveling services, though costs vary by volume and contamination. Ask suppliers for on-site screening options and get a quote before deciding to haul away and replace.

Costs depend on site prep, access, and required depths, but a rough estimate for a simple 20x20 gravel driveway in Provo is $800 to $3,000 total, covering materials, grading, and compaction. Larger jobs, difficult access, drainage work, or additional base depth can push costs higher; contractors may charge by the square foot, by the hour, or by the ton plus labor. Get multiple local quotes and ask for itemized pricing (materials, hauling, grading, compaction) to compare accurately.