Fill Dirt in Wyldwood, TX

Prices for fill-dirt in the Texas region around Wyldwood vary with supplier, screening, and haul distance. Check Hello Gravel for live per-ton and per-cubic-yard pricing and note our minimum order is 3 tons; typical regional ranges are often lower than specialized engineered fills but vary daily. For a firm number, request a quote or check availability for your zip code on our site.

Screened versus unscreened fill-dirt availability depends on local suppliers; some offer screened (fines removed) and others only unscreened bulk material. Hello Gravel’s minimum order is 3 tons, but individual suppliers or truck types (tri-axle) may have higher practical minimums for delivery—often 10 to 15 tons for full-truck deliveries. Select screened fill-dirt in checkout or contact our team to confirm supplier minimums for your address.

Volume for 1,000 sq ft: 2 inches = about 6.2 cubic yards; 4 inches = about 12.3 cubic yards. Using a common fill-dirt bulk weight (rough average ~1.1–1.3 tons per cubic yard), expect roughly 7–8 tons for 2 inches and 14–16 tons for 4 inches. Order 5–10% extra to allow for compaction and grading losses and to avoid shortfalls on site.

Clay-heavy native soils in the Wyldwood area hold water and compress unevenly, so adding loose fill-dirt without proper prep increases settlement risk and can create poor drainage. To reduce issues, remove organics, place fill in controlled lifts and compact each lift, and slope the finished grade to shed water away from structures. For critical areas consider using a granular engineered fill or a geotechnical review to avoid long-term settlement and ponding.

Fill-dirt is usually fine-grained and is appropriate for non-structural yard raising but is not an ideal long-term driveway base. For driveways use a well-graded crusher run or road base (3/4" minus) compacted in 4–6" lifts to a high density (contractors commonly aim for 95% of standard proctor or a well-compacted surface). For yard raising, use low-organic fill placed in 4–6" lifts and compacted to generally 85–92% relative density; if loads are expected, upgrade to engineered fill and get a pro recommendation.

Permit requirements vary by scope and location; small yard fills often do not need permits but fills near creeks, in floodplains, or over certain heights typically require Travis County or city approvals. Always check with Travis County permitting and your local municipality before large deliveries, and disclose fill placement in a permit application if you are altering drainage or raising grade near property lines. When in doubt, contact local permitting and mention planned tonnage and location to get guidance.

Costs vary by job size and equipment: for a small residential raise expect typical contractor or rental costs in the range of about $300–$1,500, while larger or more complex sites can run $1,500–$5,000 or more. Equipment/operator rates, access difficulty, and the need for multiple passes or a roller drive the price, so get local quotes and factor in extra for mobilization if your driveway or access is tight. Ask contractors for line-item pricing (machine time, operator, grading) to compare bids accurately.

Common alternatives include engineered structural fill, crusher run/road base, decomposed granite, and clean sand or gravel mixes. Engineered fill provides controlled compaction and minimal settlement but costs more; crusher run is preferred for driveway bases because it compacts hard and drains better than plain fill-dirt; decomposed granite is attractive for paths and low-traffic areas but is not suitable for structural fills. Choose based on project purpose: yard raising (fill-dirt), structural bases (engineered fill or crusher run), and surface finishes (DG or topsoil), and get quotes for accurate cost comparisons in Wyldwood.

Yes—many local contractors recommend geotextile fabric under fill or granular layers when the subgrade is clay or soft to help separate materials and reduce mixing, which improves stability. Edge restraints are commonly recommended for driveways, raised beds, and pads to hold material in place and limit lateral spreading as soils settle. Discuss fabric type and restraint details with your contractor since site conditions in Wyldwood determine the best solution.

Aim for drier weather windows—avoid scheduling major fills during Wyldwood’s wet periods when heavy rains can delay delivery, make compaction ineffective, and increase settlement risk. Late spring or early fall often provides more reliable dry conditions, but check local forecasts and book delivery with some flexibility since heavy summer storms can cause delays. Hello Gravel offers standard 2+ business day scheduling and a next-day option for orders placed before noon CST; choose a dry day and request the preferred delivery date at checkout.