Fill Dirt in Teague, TX

In Teague, delivered fill dirt commonly falls between about $25 and $75 per cubic yard (roughly $30 to $60 per ton) depending on supplier location, haul distance, and order size. Hello Gravel minimum order is 3 tons and standard delivery is 2+ business days; small loads or next-day delivery may incur extra fees. Ask for an itemized quote that separates material, delivery, and optional services so you can compare accurately.

To raise 1,500 sq ft by 6 inches you need about 28 cubic yards (1,500 sq ft x 0.5 ft = 750 cubic ft; 750/27 = 27.8 cy). Using a common conversion of about 1.3 tons per cubic yard, that equals roughly 36 to 40 tons of fill dirt; actual weight can vary with moisture and compaction so order a small contingency (5-10%).

Fill dirt alone is usually not the best structural base for driveways in West Texas because local clay soils have high shrink-swell and poor load-bearing properties. For driveways, contractors typically use a compacted, engineered base such as crushed stone or structural fill with proper compaction and drainage. Use fill dirt to raise grades or fill low spots, but rely on a structural base for long-term driveway performance and consult a local contractor for specification.

Many contractors in the Teague area prefer unscreened fill dirt for bulk volume work where cost matters and the material will be buried or compacted. For final grade, landscaping, or lawn prep, screened fill dirt is recommended because it is easier to grade, supports seeding, and has fewer large debris pieces. Ask suppliers about screening options and price differences when you order.

If properly placed and compacted, most fill dirt projects settle mostly within the first 6 to 12 months as loose material consolidates under seasonal wetting and drying. Without adequate compaction and drainage, you may see low spots or erosion that require touch-up grading every 1 to 3 years. Good site preparation and proper drainage reduce the need for frequent regrading.

Yes—raising grades with well-compacted fill dirt can improve surface runoff and keep water away from foundations, but it does not change the underlying clay soil’s infiltration characteristics. For real improvement in wet spots, combine fill with grading to create swales, install French drains or downspout extensions, and ensure positive slopes away from buildings. Coordinate any large changes with local permits and consider a contractor for stormwater solutions.

Permit requirements vary by project size and location; Teague and Freestone County may require grading or erosion-control permits for large earthmoving or work that affects drainage. If the work impacts right-of-way, wetlands, septic systems, or stormwater, additional approvals or inspections could be needed. Before you order large loads, contact Teague City Hall or Freestone County Planning/Building to confirm permit rules and timelines.

For building pads and foundations you should use engineered structural fill that meets compaction and material specifications from a geotechnical report—typical fill dirt is not designed or tested for structural support. Fill dirt is fine for non-structural grade adjustments and landscaping but not for supporting footings or slabs. Arrange a geotechnical evaluation for any foundation work and follow the engineer’s compaction and material recommendations.

Hello Gravel’s network includes local suppliers that deliver to Teague; minimum order is typically 3 tons, and many suppliers will deliver small loads by tri-axle or smaller trucks depending on access. Check your zip code on Hello Gravel to see nearby options, request screened or unscreened material, and confirm any small-load or short-haul fees before ordering. Ask the supplier about truck size and drop location to ensure your site can be serviced safely.

Common extra costs include on-site spreading and grading (contractor or equipment rental), compaction (roller or plate compactor), permit fees if required, and possible small-load or short-haul delivery surcharges. Typical contractor or equipment costs vary by job size—budget for machine time (skid steer or bobcat) and compaction fees, and get written quotes that separate material, delivery, and onsite labor. Remember tailgate spreading by the driver is at their discretion and may not be guaranteed without arranging a spreading crew.