Fill Dirt in Spring Branch North, TX

Typical retail ranges for plain fill-dirt in the Spring Branch North area are about $8 to $18 per cubic yard, or roughly $12 to $25 per ton, depending on source and moisture content. Prices vary with local supply, hauling distance, and seasonal demand; check our site for live quotes by zip code to get an accurate price for your delivery date.

Hello Gravel lists a minimum order of 3 tons and offers free delivery in many areas, but delivery fees can apply depending on distance and truck routing. For Spring Branch North expect $0 to $75 typical delivery charges for small jobs; confirm cost at checkout and use the calendar to choose a delivery date.

For base layers in clay-prone areas around Spring Branch North, a well-graded granular base (crushed stone or crusher run) is preferable to plain fine fill-dirt. Fill-dirt is useful for raising grade but should be capped with 4-6 inches of crushed stone or gravel to improve drainage and load-bearing on a driveway in Texas' clay soils.

Measure the area in square feet, multiply by the desired depth in feet, then divide by 27 to get cubic yards (area x depth / 27). Convert cubic yards to tons using a local density estimate of about 1.3 to 1.6 tons per cubic yard for fill-dirt; for example, raising 1,000 sq ft by 6 inches is about 18.5 cy or roughly 24 to 30 tons. Use our online material calculator for a tailored estimate.

Most suppliers deliver fill-dirt loose; compacted delivery is uncommon and not guaranteed through Hello Gravel. For structural work or final grades you should compact fill in 4-6 inch lifts to typical engineering specs (often 90-95% standard Proctor) using a plate compactor or roller; contact a local contractor or engineer if you need certified compaction.

In the Texas climate around Spring Branch North, fill-dirt with a high clay content can shrink when dry and become very soft when saturated, which reduces bearing capacity after heavy rains. Because freezes are infrequent but possible, using well-drained fills and topping with gravel reduces surface rutting and long-term problems; proper drainage is the most important factor for performance.

For a finished driveway or equipment pad, crusher run or compacted crushed limestone outperforms plain fill-dirt because it compacts better, drains more reliably, and resists rutting. Use fill-dirt only to bring the yard to grade or to fill low spots, then install a structural base of crusher run or 3/4" minus limestone for the surface layer.

Permitting rules vary by city and county; for larger fills you may need a grading permit, stormwater or erosion control measures, and to avoid changing drainage onto neighboring properties. Check with the Spring Branch North city or county building and planning department before ordering large volumes, and tell our team about permit requirements so we can note them on the order.

Loose or uncompacted fill-dirt generally cannot safely support heavy equipment or building foundations long-term. For heavy loads or permanent structures, engineered fill and certified compaction overseen by a geotechnical or civil engineer are recommended; speak with a local engineer to specify fill materials and compaction targets for your site.

Driveways surfaced with only fill-dirt will rut and wash out after heavy rain and usually require periodic regrading and topping—often every season or after major storms. To reduce maintenance, cap the fill with a 3-6 inch layer of crushed stone or gravel and install basic drainage features like swales and downspout extensions.