Fill Dirt in South Shore Harbour, TX

Fill-dirt is usually cheaper per ton than decorative or crushed gravel because it is a basic soil product without landscaping or crushing processing. Local factors in South Shore Harbour — like truck access, wetness of the source, and how much you order — affect price, so expect variation and check our checkout for an accurate quote.

Not usually. Gravel drains well and is great as a base under driveways or pavers, but it does not compact or settle the same way as fill-dirt, so it is not a good standalone substitute for general grade-raising or backfill where compacted soil is required.

Most contracted tri-axle dump trucks that serve our area carry roughly 10 to 12 cubic yards of loose fill-dirt per load, which commonly translates to about 12 to 18 tons depending on moisture and soil type. Hello Gravel’s minimum order is 3 tons, and final load sizes depend on local supplier truck types.

Prices vary by supplier, quantity, delivery distance, and moisture content, but in the Texas Gulf Coast area you can typically expect a delivered truckload quote to fall within a local market range. The best way to know is to enter your zip code on Hello Gravel or request a quote so we can show current, location-specific pricing.

'Poor man’s concrete' generally refers to compacted aggregate or a mix of gravel and fines used as a cheap hard surface; fill-dirt is not the same. Fill-dirt compacts into firm ground but will not provide the structural strength, freeze/thaw resistance, or finish of concrete or a compacted aggregate base for load-bearing applications.

No — compacted fill-dirt becomes denser and firmer, but it does not chemically harden like concrete. For a hard, trafficable surface you should use a designed base (crushed stone, stabilized aggregate, or pavement) over properly compacted fill-dirt.

A 50 lb bag of fill-dirt is very small — roughly 0.5 to 0.6 cubic feet — so at a 1-inch depth it will cover about 6 to 7 square feet. For yard-scale or construction work in South Shore Harbour, buy by the cubic yard or ton and use Hello Gravel’s material calculator to avoid under-ordering.

You should not. Place fill-dirt in thin lifts (typically 4 to 6 inches), compact each lift with proper equipment, and only then install your gravel base. In South Shore Harbour, where groundwater and clay layers can affect settlement, proper compaction and, when needed, geotextile fabric are especially important.

Possibly — many municipalities, floodplain rules, and homeowner associations in the League City/South Shore Harbour area have regulations about changing grades, raising elevation, or modifying drainage. Check with your HOA and the League City or Galveston County building department before ordering to avoid costly removal or remediation.

Measure the length, width, and depth of the area to be filled in feet, multiply to get cubic feet, then divide by 27 to get cubic yards; add 10-20% for settlement and compaction. If you prefer not to calculate manually, use Hello Gravel’s material calculator or contact our team with project dimensions and we’ll recommend an order size and delivery options.