Fill Dirt in Shiner, TX

Delivered fill dirt prices in the West Texas/Shiner area commonly fall within a broad range depending on source, processing, and haul distance. Expect a rough range of about $10 to $35 per ton delivered; final pricing depends on your exact zip code, the supplier, and any screening or hauling fees. Use Hello Gravel to get an exact quote for your address.

Hello Gravel works with local suppliers and haulers in Lavaca County and nearby counties (Fayette, Gonzales, DeWitt) that commonly supply fill dirt. If you enter your zip code on our site we will show available local sources and exact delivery options for your location in and around Shiner. For specific quarry or pit names, request a supplier list from our team and we will connect you with nearby partners.

Most deliveries to the Shiner area use tri-axle dump trucks that typically carry roughly 10 to 20 tons of loose fill dirt, depending on load and local truck configurations. Hello Gravel has a 3-ton minimum order; many suppliers set similar minimums and some shipments are priced per ton with free delivery in many areas or a small delivery fee for longer hauls. Standard delivery is 2+ business days, while next-day delivery may be available for orders placed before noon CST for an extra fee.

Loose fill dirt in the Shiner area typically weighs about 1.2 to 1.5 tons per cubic yard, depending on moisture and composition. For example, 1,000 sq ft at 4 inches requires about 12.3 cubic yards, which is roughly 15 to 19 tons of fill dirt. Always add 5-10% for settling and compaction when ordering.

On clay soils, place fill dirt in lifts of 6 to 8 inches and compact each lift using a plate compactor or vibratory roller until you reach the specified density. Keep moisture content moderate—too dry or too wet clay will not compact well—and avoid placing deep lifts all at once. For structural work near foundations or driveways, consider engineered or tested fill and consult a local contractor or geotechnical engineer.

Fill dirt with high clay content can shrink and crack in hot, dry periods and may become soft and slow to drain after heavy rains. For Shiner properties, grade your site to shed water away from structures, use swales or French drains where needed, and avoid using pure clay fill in areas needing good drainage. Mixing in coarser materials or topping with gravel/road base improves drainage and long-term performance.

Fill dirt is inexpensive and fine for raising grades or backfilling, but it is not a durable wearing surface for driveways or farm roads. Crushed limestone or road base provides a stable, well-draining surface that compacts well and resists rutting; they are better long-term choices for drive surfaces. A common approach is to use fill dirt to build grade and then cap with road base or crushed stone for the finished surface.

Contractor pricing varies by scope, access, and site prep, but a simple delivery, spreading, and compaction job for a 1-car driveway (roughly 240-300 sq ft) may run several hundred dollars, while a 2-car driveway (around 400-600 sq ft) can run from a few hundred to over a thousand dollars. If you need material plus proper base preparation and compaction to driveway standards, expect higher costs; contact local contractors for written estimates specific to your driveway dimensions and soil conditions.

Permitting depends on the project scope and location. Small private grade changes and backyard fills often do not require permits, but adding large quantities, changing drainage patterns, placing fill near waterways, or work affecting public right-of-way may require permits from the City of Shiner or Lavaca County. Always check with the City of Shiner planning department and Lavaca County offices before importing large volumes or altering grades near property lines or streams.

Recycled and screened fill dirt options are often available locally, but quality varies by supplier—screened fill removes larger debris and is more consistent, while recycled fill may contain construction fines or screening byproducts. Ask suppliers for details on composition and whether the material meets any project or county specifications; Hello Gravel can request material photos and descriptions from local sources so you can decide if recycled or screened fill is appropriate.

Measure the area and depth, convert to cubic yards, then add 5-10% for compaction and settling before requesting a quote through Hello Gravel. Note delivery access (driveway width, overhead wires, and where to dump) in your order notes, request tailgate spreading if desired (driver discretion), and schedule delivery for 2+ business days out or request next-day before noon CST for faster service. If the fill will support structures or pavement, plan for proper compaction and a suitable cap material like road base.