Fill Dirt in San Leon, TX

Fill dirt prices in San Leon vary by supplier, truck access, and order size, but a common delivered-range is about $15 to $35 per ton. Small orders near the 3-ton minimum and difficult access can push costs higher; larger orders get better per-ton pricing. Delivery fees are often included for nearby loads, but expect additional charges for long hauls, tight access, or next-day service.

To raise 1,000 sq ft by 6 inches you need 1,000 sq ft × 0.5 ft = 500 cubic feet, which is about 18.5 cubic yards (500 ÷ 27). Fill dirt weighs roughly 1.2 to 1.5 tons per cubic yard when compacted, so plan on about 22 to 28 tons to account for compaction and settling. We recommend ordering 5-10% extra for grading losses and future settlement.

For raising grade or backfilling in San Leon, use clean, well-graded fill dirt with low organic content—this settles less and compacts more predictably. For driveways, combine a compactable fill layer with a structural base material (like crusher run or crushed stone) on top for drainage and load-bearing. Because San Leon has sandy, sometimes saline coastal soils, specify local fill that contractors know performs well in the Gulf Coast environment.

Fill dirt itself is not damaged by salt air, but salt spray and coastal moisture affect plants, metal fixtures, and erosion patterns rather than the soil’s bulk properties. Flood-prone areas can cause saturation, washout, and extra settling, so use engineered fill, proper compaction, and erosion controls (silt fencing, vegetation, or riprap) if you are in a low-lying or flood-prone spot. If your property is in a floodplain, check local floodplain management rules and consider elevation or waterproofing strategies.

You can order fill dirt through Hello Gravel to connect with local suppliers around San Leon or buy directly from local quarries and dirt yards in Galveston County. Hello Gravel shows transparent pricing and delivery windows at checkout; many local deliveries include free or low-cost delivery for nearby loads, while longer hauls typically add $50 to $200 depending on distance and site access. Remember we require a 3-ton minimum and offer next-day delivery for qualifying orders placed before noon CST (additional fee may apply).

For driveways in San Leon, crusher run (a mixture of crushed stone and fines) is usually better as a structural base because it compacts tightly and sheds water. Fill dirt is appropriate for raising grades, filling low spots, or backfill but is not a durable surface for vehicle traffic. Best practice is to use fill dirt to achieve elevation, compact it, then install crusher run or crushed stone as the driving surface.

Yes, experienced landscapers and contractors can compact fill dirt using plate compactors, rollers, or other equipment to meet local requirements. For structural or permitting needs, compaction testing (proctor tests or field density tests) may be required by engineers or county officials. Communicate with your contractor and local permitting office to confirm compaction specs and whether testing is necessary for your project.

Properly placed and compacted fill dirt can last many years, but in Gulf Coast conditions expect some settling after heavy rains or flooding that may require spot topping. For non-structural landscaping fills you might need minor top-ups within 1-3 years; areas exposed to recurring flooding or poor drainage may require more frequent replenishment or a change in design. Good drainage, vegetation, and erosion control extend longevity and reduce maintenance.

San Leon is in Galveston County and many properties are subject to county building rules, floodplain regulations, and HOA covenants where applicable, so check Galveston County permitting and your HOA before large grading or fill work. Some neighborhoods restrict truck access, parking, or offloading locations; local roads may have weight limits that affect delivery routes and fees. Contact Hello Gravel and your local permitting office early to confirm rules and avoid delays.

Installed cost (material, haul, placement, and compaction) typically ranges from about $25 to $60 per ton in the San Leon area, depending on access, required compaction, site prep, and how much spreading or testing is needed. Tight access, slope work, or required compaction testing will push costs to the higher end. For precise quotes, get an on-site estimate from a contractor or request a delivery quote through Hello Gravel.

Share site access details (gate width, driveway slope, overhead wires), target elevations, whether the area is in a flood zone, and any HOA or permit requirements. Note if you want tailgate spreading (drivers do this at their discretion) and the desired compaction level or if compaction testing is required. Providing photos and measurements helps us match the right local supplier and get an accurate delivery and equipment plan.