Fill Dirt in San Augustine, TX

Costs vary by distance, volume, and access. For small residential loads (near the 3-ton minimum) landed costs in the San Augustine area commonly range from about $150 to $600, while larger truckloads can change the per-ton price lower. Rural delivery fees, long runs from suppliers, tight access, or requested next-day service can increase the total, so get a quote that includes material, hauling, and any extra fees.

Fill dirt near San Augustine is typically sourced from local borrow pits, road or construction excavations, and regional aggregate suppliers. Because Hello Gravel uses regional suppliers, material may reflect local geology, so color and texture can vary from one load to the next. If you have a color or composition preference, note it in your order and our team will try to match local options.

For driveways and grading in San Augustine, use a clean, compactable fill dirt with mostly fines and small particles (mostly passing 3/4u0022 sieve) and minimal organic material. A slightly clayey sandy silt that compacts well is preferred to minimize future settling, but avoid loose, organic, or root-filled soils. For the driving surface itself, place a layer of road base or crusher-run over the compacted fill dirt for better durability.

Fill dirt densities vary with moisture and composition, but a good rule of thumb is 1 cubic yard of fill dirt weighs about 1.2 to 1.6 tons. That equals roughly 0.044 to 0.059 tons per cubic foot. Use these ranges to estimate and then round up to account for compaction and waste when ordering.

Small residential deliveries usually do not require a permit, but large fills, long-term stockpiles, or changes to lot drainage may trigger county or city permits. Check with the City of San Augustine building or planning department and San Augustine County before placing big orders to confirm local rules, and consider erosion control and septic setbacks. If you are filling a floodplain, wetlands, or right-of-way, contact local authorities first.

Performance depends on the fill's clay and silt content. In wet seasons clay-rich fill can become soft and lose strength, while in hot, dry summers shrink-swell can cause minor cracking or settling if the soil has high clay content. Proper grading, drainage, and compaction reduce seasonal movement, so plan surface drainage away from the fill and cover or cap the fill with a suitable surface layer.

Compact in thin lifts—typically 4 to 6 inches for hand or plate compaction and up to 8 to 12 inches for heavier rollers—using a vibratory plate compactor for small areas and a vibratory roller or sheeps-foot for larger or deeper fills. Keep the fill at near-optimal moisture for compaction; slightly damp soil compacts better than bone dry or waterlogged material. For driveways and structural fills, hire equipment and an operator experienced in compaction to achieve consistent results.

Fill dirt is low in organic matter and is used to build volume and raise grades, not for planting or final driving surfaces. Topsoil is for landscaping and plants, while crusher-run and road base contain stone and fines that lock together to form a strong, durable surface for driveways. For a lasting driveway in San Augustine, use compacted fill dirt for subgrade then cap with crusher-run or road base rather than leaving fill dirt as the finished driving surface.

When properly compacted and capped with an appropriate surface (road base, crusher-run, or pavement), fill dirt subgrades can support a driveway for many years with periodic maintenance. If fill dirt is used as the surface without a stone cap, potholes and rutting can appear within a single wet season. Expect routine maintenance like grading, adding stone, and improving drainage every few years depending on use and climate exposure.

Yes, Hello Gravel connects customers with trusted local suppliers and contracted haulers in the San Augustine area, and you can request delivery date and tailgate spreading at checkout. Spreading is performed at the driver's discretion for safety and equipment reasons and is not guaranteed, so note spreading needs in your order and contact our team to discuss options. For larger projects, consider hiring a local contractor for machine grading and compaction.

Order early and check access, overhead wires, and turning space for a tri-axle dump truck before scheduling delivery. Remember Hello Gravel's minimum order is 3 tons, next-day delivery is available for orders placed before noon CST for an additional fee, and regional sourcing may change appearance from load to load. Provide clear drop location instructions and contact our team if you need help calculating quantities or requesting spreading services.