Fill Dirt in Saint Paul, TX

For 1,000 sq ft at 3 inches you need about 9.3 cubic yards (roughly 11–13 tons of fill-dirt depending on moisture and compaction). Typical delivered costs in the Texas region run about $25–$55 per ton, so expect a ballpark of $275–$715 including delivery—your final price depends on your zip code, supplier, and whether you need spreading or small-access fees. Check your zip code on our site or contact sales for an exact quote and scheduling.

Fill-dirt and gravel serve different purposes: fill-dirt is low-organic soil meant for grading and filling voids, while pea gravel and crushed stone are used where drainage or a compacted base is needed. We can supply crushed gravel if you want a firm, draining layer, but it is not a direct substitute when you need soil for planting or final grade; you should tell us your project so we can recommend the right material. Compaction services are not guaranteed with standard delivery; request tailgate spreading at checkout and consider a local compaction contractor for a structural base.

Crushed gravel typically costs more than fill-dirt because of quarry processing and higher demand for structural bases. In the Texas region, delivered fill-dirt usually runs about $25–$55 per ton, while crushed gravel is commonly $45–$90 per ton, depending on size and source. Prices vary by supplier, so use our checkout or contact sales for a side-by-side quote for your Saint Paul address.

Yes, we can deliver truckloads of fill-dirt in Saint Paul when our network has local supplier availability. Our minimum order is 3 tons, and deliveries are typically made by tri-axle dump trucks carrying roughly 10–14 tons per load; delivery fees depend on distance, access, and scheduled timing, though free delivery is available in many areas. Select your delivery date at checkout or contact our team to confirm truck size and any access restrictions for your property.

No, fill-dirt is not intended to form a hard, concrete-like surface when compacted; it is soil used for grading, filling low spots, and backfill. If you need a hard surface, crushed stone mixes such as crusher-run or 3/4" crushed rock compacted in layers are better choices and are available through our suppliers in the Texas region. We can supply the appropriate aggregate, but compaction and finishing are typically arranged with local contractors since drivers may only offer tailgate spreading at their discretion.

The informal 'poor man’s concrete' usually refers to mixing gravel or crushed stone with portland cement on site to create a low-cost, small-area hard surface. Hello Gravel does not sell pre-mixed cement blends, but we can deliver the gravel component (and recommend quantities); you will need to buy cement and mix on site or hire a contractor for proper proportions and curing. For structural or long-lasting slabs, we recommend using a proper concrete mix and consulting a contractor rather than relying on improvised mixes.

Fill-dirt is rarely sold in 50-lb bags because projects of this type are much more economical by the cubic yard; a 50-lb bag is about 0.018–0.02 cubic yards, so you would need dozens or even hundreds for a small patio. For patios and bases in Saint Paul, request material by cubic yards or tons through our site—use our material calculator or contact sales and give dimensions so we can recommend the right amount and delivery method.

The 10/20/30/40 rule (mixing and aggregate sizing guidance) applies to concrete mix design rather than to fill-dirt quantities. For a slab, fill-dirt is used to bring the subgrade to the correct elevation, while concrete mix proportions determine slab strength. When ordering fill-dirt for a slab project in Saint Paul, focus on accurate subgrade volume and proper compaction; discuss concrete mix needs with your concrete supplier or contractor separately.

Our standard service is material delivery by contracted dump trucks; drivers may offer tailgate spreading at their discretion but compaction and professional grading are not guaranteed. If you need compaction or grading, we can often coordinate local contractors or recommend that you hire a landscaper or excavator—costs typically vary widely based on equipment, scope, and local labor rates. Contact our sales team with project details and we can suggest options or help arrange a quote from a local service provider.

For 1,000 sq ft at 4 inches (0.333 ft) you need about 12.35 cubic yards of material, which converts to roughly 15–18 tons of fill-dirt depending on moisture and compaction (we commonly use 1.2–1.5 tons per cubic yard as a guide). Always round up 5–10% to allow for settlement and compaction, so plan to order about 13–14 cubic yards (about 16–20 tons). Use our calculator or contact sales with your Saint Paul zip code for an exact, delivered quote and scheduling.