Fill Dirt in Rockport, TX

Typical delivered prices in Rockport vary with supplier, truck distance, and moisture, but expect roughly $12 to $30 per ton (about $18 to $45 per cubic yard) for standard fill dirt. Smaller orders, next-day requests, or deliveries to remote/low-access sites may add fees. Ask Hello Gravel for an exact quote for your zip code and note that our minimum order is 3 tons.

Hello Gravel connects you with local Aransas County suppliers and hauling partners serving Rockport, so available vendors and exact delivery rules depend on your zip code. Common policies include a 3-ton minimum, dump-truck delivery (typically tri-axle), and an optional tailgate spreading service at the driver’s discretion. Check your checkout notes for delivery preferences and contact our team if you have tight access, HOA rules, or special drop requests.

Use this quick formula: cubic yards = (square feet x depth in inches) / 324. For 1,000 sq ft raised 6 inches: (1,000 x 6) / 324 = about 18.5 cubic yards. Convert to tons by multiplying cubic yards by a fill-dirt weight factor (roughly 1.2 to 1.5 tons per cubic yard depending on moisture and compaction), so expect about 22 to 28 tons as a practical estimate.

Rockport’s coastal soils commonly include sand, silty clay, and organic layers that can compress, shift, or hold water after placement. Because of the city’s flood and high water-table risk, choose fill dirt that is low in organics and properly compacted, and plan to raise finished grades above expected flood elevations where required. Expect regional variation in material color and texture; tell us your site conditions so suppliers can match a suitable material.

Contractors in the Rockport area typically place fill in lifts (about 4 to 6 inches), compact each lift with a plate compactor or roller, and regrade to slope water away from structures (1% to 2% minimum). Geotextile fabric or a gravel sublayer is often used on soft coastal sites to reduce settlement and improve drainage. Always check that placement won’t block natural drainage or violate local floodplain rules before compacting.

Possibly. Rockport and Aransas County have regulations for work in floodplains, coastal zones, and near wetlands that may require permits or elevation approvals before adding fill. Some neighborhoods or HOAs impose truck access limits, time-of-day restrictions, or weight limits on local streets. Contact the City of Rockport Building Department or Aransas County planning and check with Hello Gravel before ordering large deliveries.

Fill dirt by itself is not a durable driveway surface; as a subgrade it can settle over time, especially in coastal settings. Expect periodic settling and regrading in low-yard areas; maintenance intervals vary with traffic and drainage but plan to add or recompact material every few years. For driveways, contractors typically cap fill dirt with crusher-run or engineered base and a wearing surface to achieve long-term performance.

Fill dirt is best for raising grade and building stable subgrades but is not ideal as a finished surface because it can erode and rut. Washed sand drains quickly but can shift under traffic and wash away in heavy rain. Engineered base and crusher-run are compactible, stable, and preferred for driveways and erosion-resistant surfaces; combine these with proper grading and drainage for coastal Rockport conditions.

Clear the intended drop area of vehicles, low-hanging branches, and loose obstacles, and mark the preferred dump location and any underground utilities. Confirm truck access (turning radius, bridge/weight limits, and overhead clearance) and add delivery notes at checkout about gates, locks, or HOA rules. If you need spreading, request it at checkout, but remember drivers perform tailgate spreading at their discretion for safety.