Fill Dirt in Presidio, TX

In Presidio, fill dirt is usually a locally sourced mix of sand, silt, fines and often caliche or small rock fragments reflecting the Trans-Pecos geology. It is generally heavier and denser than topsoil and should be mostly free of organic material and vegetation for use under pads or walkways. Regional batches will vary in color and texture, so expect some variation from photos.

Because Presidio is remote, delivered fill dirt typically runs higher than urban areas; a rough delivered range is $10 to $40 per ton depending on distance, truck type, and order size. Hello Gravel requires a 3-ton minimum and shows specific pricing when you enter your zip code; request a quote to see exact local rates and any additional haul or placement fees.

For driveways and general building pads, homeowners in West Texas commonly use screened fill dirt or u00223/4-inch minusu0022 material that is well-graded and free of organic debris. For driveway bases add a layer of crushed stone or base rock on top of the fill; for structural building pads, follow engineer specs which may call for engineered fill with specified particle-size limits.

A practical estimate is 1.2 to 1.5 tons per cubic yard for typical fill dirt, depending on moisture and compaction. For example, a 10 cubic yard load will usually weigh about 12 to 15 tons; ask Hello Gravel for a site-specific estimate if you expect heavy caliche or large rock content.

Residential building pads in the area commonly require compaction to around 90% of the Standard Proctor maximum dry density; heavier loads or engineered work can require 95% or higher. Typical field tests are nuclear density gauge checks or sand cone tests, and a lab Proctor test identifies the target density and optimum moisture—hire a geotechnical engineer or testing firm for formal projects.

Hello Gravel connects you with local suppliers and contracted haulers who deliver screened fill dirt to Presidio; availability varies so check your zip code on our site or call our team for options. Spreading (tailgate spreading) may be available on request but is performed at the driver’s discretion and cannot be guaranteed; for dedicated spreading or grading hire a local contractor or landscaper.

Stabilization depends on soil type and intended use: lime can improve plastic clay soils common in some pockets, while cement or cement-lime blends give stronger stiffness for heavy-traffic areas. Because the wrong additive can cause problems, consult a local soil engineer or county health department before adding stabilizers, especially near septic systems.

On arid slopes around Presidio, combine well-graded fill with coarse sand or small gravel, install erosion-control blankets or wattles, and use terraces or step-backs to slow runoff. Plant drought-tolerant native grasses or shrubs and apply mulch or hydroseeding where vegetation is expected; temporary erosion control after grading is crucial during the first rainy season.

Permit and inspection rules vary by project: many residential building pads require a county building permit, compaction reports, or engineered fill specifications, and septic installations typically involve the county health office. Always check with Presidio County Permits and the local health department before placing substantial fill to confirm required tests, inspections, or setbacks.