Fill Dirt in Point Comfort, TX

Delivered fill dirt in the Point Comfort area commonly ranges from about $8 to $25 per cubic yard, depending on haul distance, supplier, and material quality. Converted to tons, that works out roughly to $6 to $20 per ton (fill dirt typically weighs about 1.2 to 1.6 tons per cubic yard). Exact pricing varies with local availability, moisture content, and truck access, so check your zip code on Hello Gravel for an up-to-date quote.

To raise a typical 1-car driveway (about 10 ft wide by 18 ft long) by 6 inches you need roughly 3.3 cubic yards of material, which is about 4 to 6 tons of fill dirt depending on density and compaction. For other sizes, multiply square footage by 0.5 ft (for 6 inches) then divide by 27 to get cubic yards. Use Hello Gravel's calculator or contact our team for a quick, area-specific estimate.

For a 1,000 sq ft area raised 6 inches, the volume is about 18.5 cubic yards, which typically equals about 22 to 30 tons of fill dirt depending on moisture and compaction. For quick estimates: multiply area (sq ft) by depth in feet, divide by 27 for cubic yards, then multiply by 1.2–1.6 for tons. Always add 5-15% extra for settlement and grading loss.

For bulk grade-raising in Point Comfort, use clean fill dirt with low organic matter and a mix of sand and clay for stability; avoid topsoil or high-organic loam as it will compress and settle. For driveways, contractors often combine structural fill or road base (crushed limestone or compactable screenings) underneath a driveway surface, because pure fill dirt does not drain or support traffic as well. Specify 'clean, compactable fill' when ordering and note any need for screenings or rock in Order Notes.

Most residential projects importing fill dirt do not require a city-level permit in Point Comfort, but rules can apply if your property is in a FEMA floodplain, coastal zone, or if the fill affects drainage, wetlands, or a septic system. Calhoun County or Point Comfort city offices can confirm setbacks or environmental requirements, so contact them before large deliveries. When in doubt, reach out to the city or county building department to avoid potential fines or required remediation.

Fill dirt can be used for raising grades near the coast, but it is prone to settling and erosion if not compacted and protected with proper drainage. In tidal, storm, or flood-prone areas near Point Comfort, you should compact fill in lifts, provide positive drainage away from structures, and use erosion controls like vegetation, check dams, or riprap. For critical elevations (near base flood elevation), consider engineered fill and consult local flood regulations before placing material.

Many local contractors near Point Comfort prefer structural materials such as road base, crushed concrete, or crushed limestone for driveways because those materials compact better and shed water more effectively than loose fill dirt. Fill dirt is commonly used for bulk grading, raising lots, and underbuilding before placing structural base. If you want a durable driveway, discuss a layered approach with contractors: compacted structural base topped with a finish surface.

Most deliveries in the area are made by tri-axle dump trucks; expect trucks 30–40 feet long and weighing up to 30 tons when loaded. Narrow roads, low-hanging wires, culverts, and residential weight limits can restrict delivery placement, so measure gate width, overhead clearance, and driveway bearing before ordering. Add clear delivery instructions and photos at checkout so the hauler can confirm access and avoid extra fees or failed drops.

Fill dirt can settle over several months to a year in Texas climates; most settlement happens within the first few months after placement. Best practice is to place fill in 4- to 6-inch lifts and mechanically compact each lift with a plate compactor or roller; moisture conditioning improves compaction. For driveways, patios, or building pads, allow time for settlement or use engineered compaction specs and testing if surface stability is critical.

Hello Gravel connects customers to local suppliers and haulers serving Point Comfort and greater Calhoun County; use our site to check zip-code availability and get quotes. Nearby sources often include quarries and gravel pits in Port Lavaca, Victoria, and surrounding counties, but exact suppliers vary by region and season. If you need a large quantity or specialized blend, contact Hello Gravel so we can match you with the right local supplier and truck.

Delivery cost is strongly influenced by the distance from the supplier to Point Comfort because truck time and fuel are the main cost drivers; the farther the haul, the higher the delivery fee. Other factors include load size, road restrictions, and whether offloading requires extra labor or longer drive time. For an accurate total, enter your address on Hello Gravel or call our team—comparative quotes from nearby suppliers often show meaningful savings.