Fill Dirt in Merit, TX

Typical prices for fill dirt in West Texas (Merit area) vary by supplier and haul distance; expect approximate ranges of $10 to $30 per ton (roughly $12 to $35 per cubic yard) before delivery. Hello Gravel has a 3-ton minimum order and standard delivery is 2+ business days; next-day delivery is available for orders placed before noon CST for an additional fee. Final price depends on local supplier rates, truck access, and how far material must be hauled—check your zip code or contact our team for an exact quote at 855-241-8884 or text 844-407-3734.

Use this rule: cubic yards = (area in sq ft * depth in feet) / 27, and 1 cubic yard of typical compacted fill dirt is about 1.1 to 1.3 tons (varies by moisture and compaction). As a quick guide per 100 sq ft: 2u0022 = ~0.62 yd3 (~0.7 ton), 4u0022 = ~1.23 yd3 (~1.5 tons), 6u0022 = ~1.85 yd3 (~2.2 tons), 12u0022 = ~3.70 yd3 (~4.4 tons). For an exact amount, use our material calculator or contact Hello Gravel with your dimensions so we can factor local material density and compaction.

Fill dirt can be used in Merit to raise grade, fill low spots, and for non-structural backfill, but material choice matters in expansive clay areas. Avoid organic-rich topsoil as fill; opt for clean, low-organic fill and consider using granular material (road base) under paved areas to improve drainage and reduce movement. For foundations or structures on expansive clay, consult a geotechnical engineer—engineered fill or specific compaction specs are often recommended to limit long-term settlement and cracking.

For driveways use fill dirt only for raising grade or backfill; the structural base should be a 4u0022 to 6u0022 compacted layer of road base or crusher run topped with your driving surface. When placing fill dirt, place in lifts (layers) no more than 6u0022 to 8u0022 and compact each lift with a plate compactor or roller to achieve a firm base. For building pads, local codes often require engineered fill and specific compaction tests—hire a contractor or geotech for any structural pad work.

Fill dirt is primarily fines and is inexpensive, making it good for raising grade and non-structural backfill but poor for load-bearing drive surfaces and drainage. Crusher run and road base are angular, compactable aggregates that form a stable, load-bearing base and are better choices for driveways and structural backfill. Crushed limestone is commonly used in our region for durable driveway surfaces; in Merit’s clay soils, use a granular base beneath any gravel surface rather than relying on fill dirt alone.

If fill dirt is used only as a subgrade and a proper granular top is installed, maintenance is minimal—occasional regrading, adding stone to low spots, and keeping drainage clear. A surface made mostly of uncompacted fill dirt will rut, dust, and erode quickly in Merit’s climate and usually requires frequent repairs after heavy rains. Expect a properly built gravel driveway (granular base + surface stone) to last many years with seasonal maintenance; plain fill dirt as the surface will have a much shorter usable life.

Merit is a small, rural community and some properties have narrow driveways, low-clearance gates, private bridges, or local weight limits that affect dump truck access. Hello Gravel deliveries use contracted tri-axle dump trucks and require clear access and a safe place to dump; note any gates, dogs, or obstacles in Order Notes and confirm access when you order. If county or private roads have weight restrictions, inform us up front so we can coordinate a suitable delivery plan or smaller truck if available.

Small landscaping fills and minor grade changes usually do not need permits, but anything that affects drainage, floodplain limits, or supports a structure may require permits or inspections—check with Hunt County or the Merit city office if your property is within town limits. Geotextile fabric is often recommended over soft, clayey subsoils in West Texas to help stabilize and separate fill from underlying soils, especially under driveways and pathways. For structural pads, always confirm local permit requirements and consider a geotechnical report to define required fill type and compaction.

Use Hello Gravel’s online checkout to enter your zip code, select Fill Dirt, and choose delivery date; minimum orders are 3 tons and standard delivery is 2+ business days with next-day available for orders placed before noon CST for an extra fee. Add clear delivery instructions and any access notes so the driver can place material safely; you can request tailgate spreading at checkout but drivers perform spreading only at their discretion. If you need help sizing your order or checking for local restrictions, contact our team at 855-241-8884 or text 844-407-3734 for guidance.