Fill Dirt in Mart, TX

Prices in Mart, TX for delivered fill dirt commonly fall in a range rather than a single number because of local sourcing and truck distances. Expect roughly $8 to $25 per cubic yard delivered (about $6 to $20 per ton using a typical conversion of 1.2 tons per cubic yard), with Hello Gravel offering transparent, location-based pricing and a minimum order of 3 tons. For an exact price for your address, check our checkout or get a quote using your zip code.

Mart is a small city, so many bulk deliveries come from regional suppliers serving West Texas rather than a quarry inside town. Hello Gravel connects you with vetted local and regional suppliers and haulers that serve Mart, TX; enter your zip code on our site or contact our team and we will show available suppliers and delivery options for your area.

Use simple conversion rules: 1 cubic yard = 27 cubic feet and will cover 324 square feet at 1 inch deep (324/D where D is depth in inches). For weight conversions, a practical estimate is 1 cubic yard of fill dirt ≈ 1.1 to 1.4 tons (commonly 1.2 tons/yd3); include 5-15% extra for settlement and compaction. If you tell us the area and desired depth, our material calculator or sales team can give a project-specific estimate.

For yard leveling and non-structural fills, local fill dirt free of vegetation and large debris is usually fine; tighter, clayey fill holds grade well but may retain moisture. For driveways and building pads, use structural or engineered fill: a well-graded mix of soil and granular material or clean compactable fill topped with crushed stone for the driveway surface. For any foundation or pad, consult your local building official or engineer — in West Texas, contractors often specify low-organic, well-compacted fills to manage expansive soils.

Compaction needs depend on the project: landscape fills can often be compacted to general firmness, while structural fills under foundations normally require specified compaction (commonly 90-95% of Standard Proctor) and a geotechnical report. For small home jobs, spread fill in 4-6 inch lifts and compact each lift with a vibrating plate compactor; for larger areas use a walk-behind roller or a ride-on vibratory roller and, for very heavy clay, a sheepsfoot roller. Ask a local contractor or engineer for compaction specs for building pads to meet code in Mart, TX.

Drivers may be able to perform tailgate spreading at their discretion; you can request this at checkout but there are no guarantees because spreading depends on site access, truck position, and safety. We recommend planning for some manual spreading or renting a skid steer if you need precise spreading or large volumes moved away from the truck.

Mart and West Texas conditions—hot summers with occasional heavy storms—mean erosion and drainage are the main concerns: loose fill on slopes can wash out during storms and clay-rich fills can swell when wet. Avoid placing and compacting fill when the soil is saturated, grade so water runs away from structures, and consider erosion control (straw, seed, or erosion mat) on exposed slopes until vegetation establishes. For projects near the rainy season or in low spots, plan extra drainage and stabilization measures.

Provide your delivery address, desired delivery date, approximate area and depth of fill, and any site access details (driveway width, overhead power lines, where the truck can dump). Mention if you want tailgate spreading requested and note any color or material preferences, and our team will confirm what regional material is available, delivery timing (standard 2+ business days or next-day for orders placed before noon CST), and a clear price.