Fill Dirt in Lumberton, TX

Typical delivered fill dirt prices in the Lumberton/West Texas area usually fall in the range of $12 to $35 per ton, or about $15 to $45 per cubic yard depending on moisture and compaction. Prices vary by supplier, haul distance, and whether the load is a full truck or partial load; Hello Gravel shows exact pricing for your zip code at checkout. Remember our minimum order is 3 tons and standard delivery is 2+ business days, with next-day available for orders placed before noon CST for an extra fee.

Hello Gravel connects you with local suppliers and contracted haulers that serve Lumberton; exact supplier names and minimums appear when you enter your zip code. Typical local suppliers load tri-axle trucks (about 8 to 12 tons) and may charge a minimum delivery fee for partial loads; many areas also qualify for free delivery depending on distance. If you need a smaller quantity, check the platform for 'yard' pricing or contact our team for split loads or smaller truck options.

On clay-prone sites around Lumberton, a well-graded sandy-silty fill with some coarse sand and small gravel performs better than high-clay material because it drains and compacts more predictably. For building pads or structural work, engineered structural fill or compactible granular fill is recommended and may be required by an engineer. Always confirm with a soil test or geotechnical recommendation before buying large volumes.

1,000 square feet at 6 inches depth equals about 18.5 cubic yards, which typically converts to roughly 22 to 25 tons of fill dirt (use 1.2 to 1.4 tons per cubic yard). We recommend ordering 5% to 10% extra to allow for compaction and minor grading adjustments, so plan for about 24 to 28 tons in this example. Remember Hello Gravel’s minimum order is 3 tons and our material calculator can run these numbers for your exact site.

Small landscaping fills usually do not require a permit, but larger fills, changes to drainage, or building pads often trigger city or county permits and may need grading approvals or compaction reports. Lumberton homeowners should contact the Lumberton city planning or building department (and any applicable county office or HOA) before large fills, especially if the work affects stormwater, lot lines, or floodplain areas. If you're unsure, our team can help point you to local permitting contacts.

For most driveway and yard fills, contractors use plate compactors or small vibratory rollers, placing material in lifts of 6 to 8 inches and compacting each lift. Target compaction is commonly 90% to 95% of standard Proctor for driveways and site fills, and 95%+ for structural pads or footings when required by an engineer. For critical structural work, ask for a geotechnical recommendation and a compaction report from the contractor.

Fill dirt is usually the least expensive option up front but provides poor drainage and surface stability, making it a short-term choice for driveways. Crusher run or recycled concrete compacts into a stable, well-draining base that lasts longer, requires less maintenance, and supports vehicle traffic better; these options cost more initially but save money over time. For a durable Lumberton driveway, most contractors recommend a compacted gravel or recycled concrete base topped with a wearing surface rather than plain fill dirt.

Lumberton’s hot, humid summers and seasonal heavy rains increase the risk of settlement and erosion if work is done when the ground is wet. Schedule major fill and compaction during drier periods, verify material moisture content before compacting, and avoid placing lifts on saturated subgrades. Use erosion controls like silt fences and temporary seeding if work overlaps the rainy season.

Labor and installation costs vary with site access, depth, grading, and compaction needs; typical ranges are about $8 to $25 per ton placed and compacted, or roughly $0.50 to $3.00 per square foot for common landscaping depths. Complex jobs that require grading, haul-off, retaining walls, or geotechnical testing can be higher, so get multiple local quotes and request breakdowns for material, hauling, spreading, and compaction. Hello Gravel can help get material pricing so you can compare total project bids accurately.

Keep finished grades sloping away from structures (generally 5% slope for the first 10 feet), and create swales or terraces on steeper slopes to slow runoff and direct water to approved drainage points. Use sediment controls during construction (silt fence, straw wattles), stabilize slopes with vegetation or erosion-control blankets, and consider rock-lined channels or rip-rap for concentrated flows. Consult local drainage codes and a contractor familiar with West Texas/Lumberton conditions to avoid downstream erosion or neighboring property impacts.